Advice for ZM compatiable Camera with follwing sepcs

Post here to ask any questions about hardware suitability, configuration in ZoneMinder, or experiences. If you just want to know if something works with ZoneMinder or not, please check the Hardware Compatibility sections in the forum, and the Wiki first. Also search this topic as well.
Post Reply
bisana
Posts: 23
Joined: Sun Nov 11, 2007 4:10 am

Advice for ZM compatiable Camera with follwing sepcs

Post by bisana »

Hi

I would like to query about a network camera which is compatiable with ZM . The specs for the camera are
  • Built-in MPEG-4 and JPEG digital signal output at VGA image size with up to 30 fps
    Power over Ethernet (PoE)
    Internet Protocol: TCP/IP, UDP/IP, HTTP, FTP, DHCP, NTP and SNMP.
    Built-in network interface (10Base-T / 100Base-TX) for remote monitoring by PC.
    Operating condition up to 40 degree centigrade
Could you advice on which camera I should select .

Thanks
Joseph John
A Linux User
curtishall
Posts: 440
Joined: Sat Sep 25, 2004 12:45 am
Location: Fulton, MO

Re: Advice for ZM compatiable Camera with follwing sepcs

Post by curtishall »

Indoor or outdoor? Infrared or not?
bisana wrote:Hi

I would like to query about a network camera which is compatiable with ZM . The specs for the camera are
  • Built-in MPEG-4 and JPEG digital signal output at VGA image size with up to 30 fps
    Power over Ethernet (PoE)
    Internet Protocol: TCP/IP, UDP/IP, HTTP, FTP, DHCP, NTP and SNMP.
    Built-in network interface (10Base-T / 100Base-TX) for remote monitoring by PC.
    Operating condition up to 40 degree centigrade
Could you advice on which camera I should select .

Thanks
Joseph John
--
Curtis Hall
Bluecherry
www.bluecherrydvr.com
store.bluecherry.net
bisana
Posts: 23
Joined: Sun Nov 11, 2007 4:10 am

Indoor

Post by bisana »

Hi Curtishall
Thanks for the reply
It is for indoor use . but the environment is of dust and of high temperature . Infrared option is not needed
Thanks
Joseph John
A Linux User
Post Reply