Page 1 of 1
ZoneMinder Stopped
Posted: Fri Mar 13, 2009 2:33 am
by wongzyi
Hi All,
I am new to ZoneMinder. I ve just install the latest version of zm in my ubuntu machine, and wish to setup a surveillance system. I have completed the installation and able to view the main page. However, the status at the top shows "Stopped" (note: i try to connect a USB camera).
What i want to know is.. is that anything wrong with my setup? Or the status will only change to "Running" when we have a valid camera? Because i don;t know whether it is the camera issue or the ZM problem
p/s: i tried /etc/init.d/zm status and it shows "running"
Please help.. Thank You
Posted: Fri Mar 13, 2009 2:26 pm
by liviab
Hii,
the status can be "running" without cameras working.
Did you try to change the status clicking on the button "Stopped" at the top?
If you tried but it didn't works, one possibility is verifing if you have the SELinux installed and enabled. If you have, disable it (/etc/selinux/config) and restart your machine.
Posted: Fri Mar 13, 2009 4:50 pm
by Blazer
It is normal for ZM to be in the "stopped" state when you frist install. Just click the "stopped" and change the status to running.
P.S. You do not have to reboot to disable selinux, you can type "setenforce 0" to temporarily disable it immediately. To make it perm though you should edit the /etc/selinux/config as mentioned above, or edit your /etc/grub./conf and add "selinux=0" to your kernel parameters.
Posted: Tue Mar 17, 2009 4:17 am
by wongzyi
Hi all,
Thanks for the tips. However i have tried to change the status via the method you have mentioned, but it is not working. However i have not yet test the selinux part. I will try to run a test later and let you know the result.
Any other suggestion?
Thanks
Posted: Tue Mar 17, 2009 1:51 pm
by wongzyi
I have just check the system.. It does not even install SELinux.. I had uninstall and reinstall the zoneminder again (according to the step-by-step at
http://www.zoneminder.com/wiki/index.php/Documentation), but the problem is still there. Any other suggestion??
btw.. one thing i notice:
i tried to start the zm via "zmpkg.pl start" and check the /tmp/zmpkg.log, it shows:
03/17/2009 22:06:45.124045 zmpkg[10821].INF [Command: start]
03/17/2009 22:06:45.569473 zmpkg[10821].ERR [Unable to run "sudo -u apache /usr/local/bin/zmfix", output is ""]
may i know what is the problem?
Thanks
Posted: Tue Mar 17, 2009 4:01 pm
by Blazer
Do you have the sudo package installed? (rpm -qa |grep sudo)
Which OS are you running? (cat /etc/redhat-release, or lsb_release -a)
Posted: Wed Mar 18, 2009 2:20 am
by wongzyi
Thanks for the rapid reply.. i have sudo installed and my system version is Ubuntu 8.10
Posted: Wed Mar 18, 2009 2:45 am
by wongzyi
i tried to follow the instructions told in
http://www.zoneminder.com/forums/viewtopic.php?p=29360 , and it shows:
Upgrading database to version 1.24.1
Loading config from DB
No option 'ZM_OPT_MPEG' found, removing at /usr/local/share/perl/5.10.0/ZoneMinder/ConfigAdmin.pm line 1702, <STDIN> line 2.
No option 'ZM_PATH_MPEG_ENCODE' found, removing at /usr/local/share/perl/5.10.0/ZoneMinder/ConfigAdmin.pm line 1702, <STDIN> line 2.
No option 'ZM_WEB_MONTAGE_MAX_COLS' found, removing at /usr/local/share/perl/5.10.0/ZoneMinder/ConfigAdmin.pm line 1702, <STDIN> line 2.
No option 'ZM_WEB_MONTAGE_WIDTH' found, removing at /usr/local/share/perl/5.10.0/ZoneMinder/ConfigAdmin.pm line 1702, <STDIN> line 2.
No option 'ZM_WEB_MONTAGE_HEIGHT' found, removing at /usr/local/share/perl/5.10.0/ZoneMinder/ConfigAdmin.pm line 1702, <STDIN> line 2.
No option 'ZM_WEB_DOUBLE_BUFFER' found, removing at /usr/local/share/perl/5.10.0/ZoneMinder/ConfigAdmin.pm line 1702, <STDIN> line 2.
No option 'ZM_WEB_FRAMES_PER_LINE' found, removing at /usr/local/share/perl/5.10.0/ZoneMinder/ConfigAdmin.pm line 1702, <STDIN> line 2.
No option 'ZM_WEB_FRAME_LINES' found, removing at /usr/local/share/perl/5.10.0/ZoneMinder/ConfigAdmin.pm line 1702, <STDIN> line 2.
No option 'ZM_WEB_DVR_STREAMING' found, removing at /usr/local/share/perl/5.10.0/ZoneMinder/ConfigAdmin.pm line 1702, <STDIN> line 2.
Saving config to DB
Can't find upgrade from version '1.24.1' at /usr/local/bin/zmupdate.pl line 882, <STDIN> line 2.
and now my zmpkg.pl status show zm is running already.. however at the console page the top status stil showing "Stopped"..
T.T
Posted: Thu Mar 19, 2009 10:14 pm
by cordel
When you ran the configure script, did you select the proper user and group for apache on your distro?
Might likely be a permissions problem.
Any other errors in your logs that stick out?
Posted: Mon Mar 23, 2009 12:02 pm
by wongzyi
Finally i am able to solved the "Stopped" issue and my zm is "Running" now.. and yes.. it is the permission problem. I trace thru the code to search the function where it call for changes of status, and then i found tat the cause of the bug is the zmdc.sock. Hence changing the owner and group of the zmdc.sock from apache to www-data, my zm is able to run.
Thanks for all the help provided. (However i still have problem setting up my IP cam via the ZM. )
Thank you