ZoneMinder Forums

Zoneminder 1.23.3 worked perfectly for me ... none of my installs work with 1.24.1, zmc always crashes:

04/10/09 16:38:41.088263 zmc_dvideo0[-1].INF-zm_debug.c/292 [New Debug Level = 3
, New Debug Log = /tmp/zm_debug.log.17667]
04/10/09 16:38:41.089053 zmc_dvideo0[-1].DB1-zm_monitor.cpp/1708 [Got 1 monitors
]
04/10/09 16:38:41.089139 zmc_dvideo0[-1].DB2-zm_local_camera.cpp/287 [V4L2 suppo
rt enabled, using V4L2 api]
04/10/09 16:38:41.089573 zmc_dvideo0[-1].DB1-zm_monitor.cpp/338 [monitor purpose
=1]
04/10/09 16:38:41.089605 zmc_dvideo0[-1].DB1-zm_monitor.cpp/345 [mem.size=921752
4]
04/10/09 16:38:41.095410 zmc_dvideo0[-1].DB1-zm_zone.cpp/50 [Initialised zone 0/
All - 1 - 320x240 - Rgb:ff0000, CM:3, MnAT:15, MxAT:0, MnAP:50, MxAP:75000, FB:3
x3, MnFP:50, MxFP:50000, MnBS:10, MxBS:0, MnB:0, MxB:0, OF: 0]
04/10/09 16:38:41.096845 zmc_dvideo0[-1].DB1-zm_monitor.cpp/458 [Monitor New has
function 4]
04/10/09 16:38:41.096867 zmc_dvideo0[-1].DB1-zm_monitor.cpp/459 [Monitor New LBF
= '%N - %y/%m/%d %H:%M:%S', LBX = 0, LBY = 0]
04/10/09 16:38:41.096884 zmc_dvideo0[-1].DB1-zm_monitor.cpp/460 [Monitor New IBC
= 40, WUC = 25, pEC = 10, PEC = 10, EAF = 1, FRI = 1000, RBP = 7, FM = 0]
04/10/09 16:38:41.097330 zmc_dvideo0[-1].DB1-zm_zone.cpp/889 [Got 1 zones for mo
nitor New]
04/10/09 16:38:41.097369 zmc_dvideo0[-1].DB3-zm_zone.cpp/758 [Parsing polygon st
ring '0,0 319,0 319,239 0,239']
04/10/09 16:38:41.097387 zmc_dvideo0[-1].DB3-zm_zone.cpp/796 [Got coordinate 0,0
from polygon string]
04/10/09 16:38:41.097548 zmc_dvideo0[-1].DB3-zm_zone.cpp/796 [Got coordinate 319
,0 from polygon string]
04/10/09 16:38:41.097563 zmc_dvideo0[-1].DB3-zm_zone.cpp/796 [Got coordinate 319
,239 from polygon string]
04/10/09 16:38:41.097578 zmc_dvideo0[-1].DB3-zm_zone.cpp/796 [Got coordinate 0,2
39 from polygon string]
04/10/09 16:38:41.097595 zmc_dvideo0[-1].DB3-zm_zone.cpp/816 [Successfully parse
d polygon string]
04/10/09 16:38:41.097612 zmc_dvideo0[-1].DB1-zm_zone.cpp/50 [Initialised zone 1/
All - 1 - 320x240 - Rgb:ff0000, CM:3, MnAT:25, MxAT:0, MnAP:2304, MxAP:57600, FB
:3x3, MnFP:2304, MxFP:57600, MnBS:1536, MxBS:0, MnB:1, MxB:0, OF: 0]
04/10/09 16:38:41.099023 zmc_dvideo0[-1].DB1-zm_monitor.cpp/1810 [Loaded monitor
1(New), 1 zones]
04/10/09 16:38:41.099043 zmc_dvideo0[-1].INF-zmc.cpp/186 [Starting Capture]
04/10/09 16:38:41.099117 zmc_dvideo0[-1].DB3-zm_local_camera.cpp/350 [Opening vi
deo device /dev/video0]
04/10/09 16:38:41.099174 zmc_dvideo0[-1].DB2-zm_local_camera.cpp/356 [V4L2 suppo
rt enabled, using V4L2 api]
04/10/09 16:38:41.099190 zmc_dvideo0[-1].DB3-zm_local_camera.cpp/361 [Checking v
ideo device capabilities]
04/10/09 16:38:41.099214 zmc_dvideo0[-1].DB3-zm_local_camera.cpp/371 [Setting up
video format]
04/10/09 16:38:41.099251 zmc_dvideo0[-1].FAT-zm_local_camera.cpp/387 [Failed to
set video format: Invalid argument]
04/10/09 16:38:41.099380 zmc_dvideo0[-1].INF-zm_signal.cpp/64 [Got signal 6 (Abo
rted), exiting and forcing backtrace]
04/10/09 16:38:41.099417 zmc_dvideo0[-1].ERR-zm_signal.cpp/90 [Signal address is
0x206, no eip]
04/10/09 16:38:41.099660 zmc_dvideo0[-1].ERR-zm_signal.cpp/122 [Backtrace: /lib6
4/libpthread.so.0 [0x2aaaaacec4c0]]
04/10/09 16:38:41.099697 zmc_dvideo0[-1].ERR-zm_signal.cpp/122 [Backtrace: /lib6
4/libc.so.6(gsignal+0x35) [0x3acda30215]]
04/10/09 16:38:41.099725 zmc_dvideo0[-1].ERR-zm_signal.cpp/122 [Backtrace: /lib6
4/libc.so.6(abort+0x110) [0x3acda31cc0]]
04/10/09 16:38:41.099752 zmc_dvideo0[-1].ERR-zm_signal.cpp/122 [Backtrace: /usr/
local/bin/zmc [0x40d69e]]
04/10/09 16:38:41.099780 zmc_dvideo0[-1].ERR-zm_signal.cpp/122 [Backtrace: /usr/
local/bin/zmc [0x41c265]]
04/10/09 16:38:41.099807 zmc_dvideo0[-1].ERR-zm_signal.cpp/122 [Backtrace: /usr/
local/bin/zmc [0x41c68d]]
04/10/09 16:38:41.099833 zmc_dvideo0[-1].ERR-zm_signal.cpp/122 [Backtrace: /usr/
local/bin/zmc [0x404ee5]]
04/10/09 16:38:41.099859 zmc_dvideo0[-1].ERR-zm_signal.cpp/122 [Backtrace: /lib6
4/libc.so.6(__libc_start_main+0xf4) [0x3acda1d974]]
04/10/09 16:38:41.099889 zmc_dvideo0[-1].ERR-zm_signal.cpp/122 [Backtrace: /usr/
local/bin/zmc(__gxx_personality_v0+0x1d9) [0x404a89]]
04/10/09 16:38:41.099929 zmc_dvideo0[-1].INF-zm_signal.cpp/125 [Backtrace comple
te, please execute the following command for more information]
04/10/09 16:38:41.100842 zmc_dvideo0[-1].INF-zm_signal.cpp/126 [addr2line -e /us
r/local/bin/zmc(__gxx_personality_v0+0x1d9) 0x2aaaaacec4c0 0x3acda30215 0x3acda3
1cc0 0x40d69e 0x41c265 0x41c68d 0x404ee5 0x3acda1d974 0x404a89]


ZMU shows :
Video Capabilities
Name: BT878 video (ProVideo PV143)
Type: 171
Can capture
Can tune
Overlay onto frame buffer
Can clip
Scalable
Video Channels: 4
Audio Channels: 0
Maximum Width: 768
Maximum Height: 480
Minimum Width: 48
Minimum Height: 32
Window Attributes
X Offset: 0
Y Offset: 0
Width: 320
Height: 240
Picture Attributes
Palette: 4 - 24bit RGB
Colour Depth: 24
Brightness: 32768
Hue: 32768
Colour :32768
Contrast: 32768
Whiteness: 0
Channel 0 Attributes
Name: Composite0
Channel: 0
Flags: 2
Channel has audio
Type: 2 - Camera
Format: 1 - NTSC
Channel 1 Attributes
Name: Composite1
Channel: 1
Flags: 2
Channel has audio
Type: 2 - Camera
Format: 1 - NTSC
Channel 2 Attributes
Name: Composite2
Channel: 2
Flags: 2
Channel has audio
Type: 2 - Camera
Format: 1 - NTSC
Channel 3 Attributes
Name: Composite3
Channel: 3
Flags: 2
Channel has audio
Type: 2 - Camera
Format: 1 - NTSC


I am running Centos 5.3

All I get when I run the command in the brackets is :

addr2line -e /usr/local/bin/zmc
(__gxx_personality_v0+0x1f9) 0x3bc780de70 0x3bc6c30155 0x3bc6c31bf0 0x40d78e 0x41ba
??:0


I assume I am not properly using the command. I did re install 1.23.3 and it works perfectly

I still have two broken 1.24.1 installs all with the same errors

Remove the part in brackets. I've not seen that before. However that is not your main issue, it is the failure to set a valid video format. What have you configured your monitor source to be? Perhap you can post a screenshot?