ZM New setup Question (fps)
Posted: Tue Apr 21, 2009 4:14 pm
I'm still new to ZM, but I have a strange problem. When I view live video my FPS shows up as a large negative number. Here are the specs on the system.
Supermicro X7SBA motherboard
X3220 Quad core Xeon processer
8GB Ram
CentOS 5.3 x86_64
I have 17 cameras on the system 16 via PV-183, and 1 IP camera. I had interlacing issues with the cameras attached to the PV-183 untill I dropped the resolution to 320x240. I tested this out on a smaller system using the i386 load of CentOS and had no problems. I used the 64-bit load on the production system due to the ram. The link shows a sample of what I am talking about.
http://www.a1computer.com/image1.jpg
Supermicro X7SBA motherboard
X3220 Quad core Xeon processer
8GB Ram
CentOS 5.3 x86_64
I have 17 cameras on the system 16 via PV-183, and 1 IP camera. I had interlacing issues with the cameras attached to the PV-183 untill I dropped the resolution to 320x240. I tested this out on a smaller system using the i386 load of CentOS and had no problems. I used the 64-bit load on the production system due to the ram. The link shows a sample of what I am talking about.
http://www.a1computer.com/image1.jpg