Page 1 of 1
KMC7016D and ZoneMinder
Posted: Wed May 06, 2009 2:37 pm
by watchman
Hi,
I have got a KMC7016D video card like this one
http://lionservers.com/kmc7016d/
Does this card work with Zoneminder? I couldn't find any info on this card. This card is dirt cheap and , in my opinion, quite common. So if anyone has brought this card to life with ZoneMinder, would he/she please give me some help.
With Best Regards!
Watchman
Posted: Thu May 07, 2009 12:35 am
by kingofkya
Posted: Thu May 07, 2009 12:53 pm
by watchman
Thanks for your reply.
I've tried every option mentioned in the above thread, but still no luck with my KMC7016D.
with
Code: Select all
options bttv bttv_debug=1 bttv_gpio=1 bttv_verbose=1 card=77 i2c_hw=1 i2c_scan=1 i2c_udelay=7 tuner=4
I get:
Code: Select all
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:01:0a.0, irq: 19, latency: 32, mmio: 0xcdfff000
bttv0: using: GrandTec Multi Capture Card (Bt878) [card=77,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [pre-init]
bttv0: risc main @ 0f4eb000
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: BT878A ARESET
bttv0: i2c scan: found device @ 0x0 [???]
bttv0: i2c scan: found device @ 0x2 [???]
bttv0: i2c scan: found device @ 0x4 [???]
bttv0: i2c scan: found device @ 0x6 [???]
bttv0: i2c scan: found device @ 0x8 [???]
bttv0: i2c scan: found device @ 0xa [???]
bttv0: i2c scan: found device @ 0xc [???]
bttv0: i2c scan: found device @ 0xe [???]
bttv0: i2c scan: found device @ 0x10 [???]
bttv0: i2c scan: found device @ 0x12 [???]
bttv0: i2c scan: found device @ 0x14 [???]
bttv0: i2c scan: found device @ 0x16 [???]
bttv0: i2c scan: found device @ 0x18 [???]
bttv0: i2c scan: found device @ 0x1a [???]
bttv0: i2c scan: found device @ 0x1c [lgdt330x]
bttv0: i2c scan: found device @ 0x1e [???]
bttv0: i2c scan: found device @ 0x20 [???]
bttv0: i2c scan: found device @ 0x22 [???]
bttv0: i2c scan: found device @ 0x24 [???]
bttv0: i2c scan: found device @ 0x26 [???]
bttv0: i2c scan: found device @ 0x28 [???]
bttv0: i2c scan: found device @ 0x2a [???]
bttv0: i2c scan: found device @ 0x2c [???]
bttv0: i2c scan: found device @ 0x2e [???]
bttv0: i2c scan: found device @ 0x30 [IR (hauppauge)]
bttv0: i2c scan: found device @ 0x32 [???]
bttv0: i2c scan: found device @ 0x34 [???]
bttv0: i2c scan: found device @ 0x36 [???]
bttv0: i2c scan: found device @ 0x38 [???]
bttv0: i2c scan: found device @ 0x3a [???]
bttv0: i2c scan: found device @ 0x3c [???]
bttv0: i2c scan: found device @ 0x3e [???]
bttv0: i2c scan: found device @ 0x40 [???]
bttv0: i2c scan: found device @ 0x42 [???]
bttv0: i2c scan: found device @ 0x44 [???]
bttv0: i2c scan: found device @ 0x46 [???]
bttv0: i2c scan: found device @ 0x48 [???]
bttv0: i2c scan: found device @ 0x4a [???]
bttv0: i2c scan: found device @ 0x4c [???]
bttv0: i2c scan: found device @ 0x4e [???]
bttv0: i2c scan: found device @ 0x50 [???]
bttv0: i2c scan: found device @ 0x52 [???]
bttv0: i2c scan: found device @ 0x54 [???]
bttv0: i2c scan: found device @ 0x56 [???]
bttv0: i2c scan: found device @ 0x58 [???]
bttv0: i2c scan: found device @ 0x5a [???]
bttv0: i2c scan: found device @ 0x5c [???]
bttv0: i2c scan: found device @ 0x5e [???]
bttv0: i2c scan: found device @ 0x60 [???]
bttv0: i2c scan: found device @ 0x62 [???]
bttv0: i2c scan: found device @ 0x64 [???]
bttv0: i2c scan: found device @ 0x66 [???]
bttv0: i2c scan: found device @ 0x68 [???]
bttv0: i2c scan: found device @ 0x6a [???]
bttv0: i2c scan: found device @ 0x6c [???]
bttv0: i2c scan: found device @ 0x6e [???]
bttv0: i2c scan: found device @ 0x70 [???]
bttv0: i2c scan: found device @ 0x72 [???]
bttv0: i2c scan: found device @ 0x74 [???]
bttv0: i2c scan: found device @ 0x76 [???]
bttv0: i2c scan: found device @ 0x78 [???]
bttv0: i2c scan: found device @ 0x7a [???]
bttv0: i2c scan: found device @ 0x7c [???]
bttv0: i2c scan: found device @ 0x7e [???]
bttv0: i2c scan: found device @ 0x80 [msp34xx]
bttv0: i2c scan: found device @ 0x82 [???]
bttv0: i2c scan: found device @ 0x84 [???]
bttv0: i2c scan: found device @ 0x86 [tda9887]
bttv0: i2c scan: found device @ 0x88 [???]
bttv0: i2c scan: found device @ 0x8a [???]
bttv0: i2c scan: found device @ 0x8c [???]
bttv0: i2c scan: found device @ 0x8e [???]
bttv0: i2c scan: found device @ 0x90 [???]
bttv0: i2c scan: found device @ 0x92 [???]
bttv0: i2c scan: found device @ 0x94 [???]
bttv0: i2c scan: found device @ 0x96 [???]
bttv0: i2c scan: found device @ 0x98 [???]
bttv0: i2c scan: found device @ 0x9a [???]
bttv0: i2c scan: found device @ 0x9c [???]
bttv0: i2c scan: found device @ 0x9e [???]
bttv0: i2c scan: found device @ 0xa0 [eeprom]
bttv0: i2c scan: found device @ 0xa2 [???]
bttv0: i2c scan: found device @ 0xa4 [???]
bttv0: i2c scan: found device @ 0xa6 [???]
bttv0: i2c scan: found device @ 0xa8 [???]
bttv0: i2c scan: found device @ 0xaa [???]
bttv0: i2c scan: found device @ 0xac [???]
bttv0: i2c scan: found device @ 0xae [???]
bttv0: i2c scan: found device @ 0xb0 [???]
bttv0: i2c scan: found device @ 0xb2 [???]
bttv0: i2c scan: found device @ 0xb4 [???]
bttv0: i2c scan: found device @ 0xb6 [???]
bttv0: i2c scan: found device @ 0xb8 [???]
bttv0: i2c scan: found device @ 0xba [???]
bttv0: i2c scan: found device @ 0xbc [???]
bttv0: i2c scan: found device @ 0xbe [???]
bttv0: i2c scan: found device @ 0xc0 [tuner (analog)]
bttv0: i2c scan: found device @ 0xc2 [tuner (analog)]
bttv0: i2c scan: found device @ 0xc4 [???]
bttv0: i2c scan: found device @ 0xc6 [???]
bttv0: i2c scan: found device @ 0xc8 [???]
bttv0: i2c scan: found device @ 0xca [???]
bttv0: i2c scan: found device @ 0xcc [???]
bttv0: i2c scan: found device @ 0xce [???]
bttv0: i2c scan: found device @ 0xd0 [???]
bttv0: i2c scan: found device @ 0xd2 [???]
bttv0: i2c scan: found device @ 0xd4 [???]
bttv0: i2c scan: found device @ 0xd6 [???]
bttv0: i2c scan: found device @ 0xd8 [???]
bttv0: i2c scan: found device @ 0xda [???]
bttv0: i2c scan: found device @ 0xdc [???]
bttv0: i2c scan: found device @ 0xde [???]
bttv0: i2c scan: found device @ 0xe0 [???]
bttv0: i2c scan: found device @ 0xe2 [???]
bttv0: i2c scan: found device @ 0xe4 [???]
bttv0: i2c scan: found device @ 0xe6 [???]
bttv0: i2c scan: found device @ 0xe8 [???]
bttv0: i2c scan: found device @ 0xea [???]
bttv0: i2c scan: found device @ 0xec [???]
bttv0: i2c scan: found device @ 0xee [???]
bttv0: i2c scan: found device @ 0xf0 [???]
bttv0: i2c scan: found device @ 0xf2 [???]
bttv0: i2c scan: found device @ 0xf4 [???]
bttv0: i2c scan: found device @ 0xf6 [???]
bttv0: i2c scan: found device @ 0xf8 [???]
bttv0: i2c scan: found device @ 0xfa [???]
bttv0: i2c scan: found device @ 0xfc [???]
bttv0: i2c scan: found device @ 0xfe [???]
bttv0: tuner absent
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [audio: mute]
bttv0: video mux: input=0 mux=2
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [audio: mute]
bttv0: PLL: 28636363 => 35468950 .<7>bttv: open minor=0
ok
bttv: open minor=224
bttv0: open called (type=vbi-cap)
bttv0: PLL: no change required
Any help would be greatly appreciated. Thank you in advance.
Posted: Thu May 07, 2009 10:12 pm
by kingofkya
what version of v4l are you running and what version of zoneminder
if you don't know what os ubuntu fedora etc..
Posted: Fri May 08, 2009 11:40 am
by ludri
I didn't get this card to work (or even on Windows to function properly). After week of trying I gave it back to seller and got kodicom 4400r clone.
Posted: Fri May 08, 2009 11:46 am
by watchman
Thank you for your reply.
kingofkya wrote:what version of v4l are you running and what version of zoneminder.
ZoneMinder: Release 1.24.1 23rd February 2009
Video for Linux: 3.95
Should I use v4l or v4l2?
kingofkya wrote:
if you don't know what os ubuntu fedora etc..
I'm running openSuSE 11.1 64-bit SMP with kernel version 2.6.26.2
Thank you in advance
Posted: Fri May 08, 2009 8:24 pm
by watchman
ludri wrote:I didn't get this card to work (or even on Windows to function properly). After week of trying I gave it back to seller and got kodicom 4400r clone.
If I send the card back, it would cost me as much as card itself. I think the card has everything in place and its features are too good to be thrown away. If bttv does not work with the card, I would write a new one. But if bttv works with KMC7016D and it was just a matter of right settings, I just would waste my time.