DLink DSC-5220
Posted: Thu Jun 18, 2009 5:58 am
Managed to get zoneminder up but experienced some problems:
===== LOG FILE 1 ========
06/18/09 13:44:03.912266 zmc_m1[-1].DB3-zm_remote_camera_http.cpp/266 [Got status '200' (OK), http version 1.0]
06/18/09 13:44:03.912357 zmc_m1[-1].DB3-zm_remote_camera_http.cpp/289 [Got content type 'image/jpeg'
]
06/18/09 13:44:03.929184 zmc_m1[-1].DB3-zm_remote_camera_http.cpp/165 [Socket closed]
06/18/09 13:44:03.929284 zmc_m1[-1].DB3-zm_remote_camera_http.cpp/459 [Got end of image by closure, content-length = 0]
06/18/09 13:44:03.929388 zmc_m1[-1].INF-zm_signal.cpp/72 [Got signal 7 (Bus error), crashing]
====== END======
======LOG FILE 2 =======
06/18/09 13:44:03.977183 zmc_m1[-1].DB1-zm_monitor.cpp/369 [Unable to map file /dev/shm/.zm.mmap.1 (27649364 bytes) to locked memory, trying unlocked]
06/18/09 13:44:04.179450 zmc_m1[-1].INF-zmc.cpp/186 [Starting Capture]
06/18/09 13:44:04.182974 zmc_m1[-1].DB3-zm_remote_camera_http.cpp/104 [Connected to host, socket = 6]
06/18/09 13:44:04.183149 zmc_m1[-1].DB3-zm_remote_camera_http.cpp/125 [Request sent]
06/18/09 13:44:06.682865 zmc_m1[-1].ERR-zm_remote_camera_http.cpp/140 [Select timed out]
06/18/09 13:44:06.683167 zmc_m1[-1].ERR-zm_remote_camera_http.cpp/239 [Unable to read header data]
06/18/09 13:44:06.683265 zmc_m1[-1].ERR-zm_remote_camera_http.cpp/1042 [Unable to get response]
06/18/09 13:44:06.683427 zmc_m1[-1].ERR-zmc.cpp/258 [Failed to capture image from monitor 1 (0/1)]
=====END========
Any suggestions how to get the problem solved? TIA!
===== LOG FILE 1 ========
06/18/09 13:44:03.912266 zmc_m1[-1].DB3-zm_remote_camera_http.cpp/266 [Got status '200' (OK), http version 1.0]
06/18/09 13:44:03.912357 zmc_m1[-1].DB3-zm_remote_camera_http.cpp/289 [Got content type 'image/jpeg'
]
06/18/09 13:44:03.929184 zmc_m1[-1].DB3-zm_remote_camera_http.cpp/165 [Socket closed]
06/18/09 13:44:03.929284 zmc_m1[-1].DB3-zm_remote_camera_http.cpp/459 [Got end of image by closure, content-length = 0]
06/18/09 13:44:03.929388 zmc_m1[-1].INF-zm_signal.cpp/72 [Got signal 7 (Bus error), crashing]
====== END======
======LOG FILE 2 =======
06/18/09 13:44:03.977183 zmc_m1[-1].DB1-zm_monitor.cpp/369 [Unable to map file /dev/shm/.zm.mmap.1 (27649364 bytes) to locked memory, trying unlocked]
06/18/09 13:44:04.179450 zmc_m1[-1].INF-zmc.cpp/186 [Starting Capture]
06/18/09 13:44:04.182974 zmc_m1[-1].DB3-zm_remote_camera_http.cpp/104 [Connected to host, socket = 6]
06/18/09 13:44:04.183149 zmc_m1[-1].DB3-zm_remote_camera_http.cpp/125 [Request sent]
06/18/09 13:44:06.682865 zmc_m1[-1].ERR-zm_remote_camera_http.cpp/140 [Select timed out]
06/18/09 13:44:06.683167 zmc_m1[-1].ERR-zm_remote_camera_http.cpp/239 [Unable to read header data]
06/18/09 13:44:06.683265 zmc_m1[-1].ERR-zm_remote_camera_http.cpp/1042 [Unable to get response]
06/18/09 13:44:06.683427 zmc_m1[-1].ERR-zmc.cpp/258 [Failed to capture image from monitor 1 (0/1)]
=====END========
Any suggestions how to get the problem solved? TIA!