Will 2 pico2k/UCC4/Conexant fusion 878A 4 channel cards work

Post here to ask any questions about hardware suitability, configuration in ZoneMinder, or experiences. If you just want to know if something works with ZoneMinder or not, please check the Hardware Compatibility sections in the forum, and the Wiki first. Also search this topic as well.
Post Reply
scribble
Posts: 5
Joined: Fri Oct 16, 2009 11:01 am

Will 2 pico2k/UCC4/Conexant fusion 878A 4 channel cards work

Post by scribble »

As the title states, i have two of these four channel cards. If i add both of them to my Linux server will Zone Minder utilise both of them to give 8 possible channels of video?

Or would i be better spending a few hundred on an 8 channel card? Its just for home monitoring.




Thanks for your time
whatboy
Posts: 304
Joined: Mon Aug 31, 2009 10:31 pm

Post by whatboy »

I have 2 Hauppauge ImpactVCB installed on my box, If I use only 2 ports it will give me 5.1 fps, but only using 3 ports, it gives me 3.4 fps, if I use all 4, then it will give me 2.x fps, and that sucks... guess it would be better to spend some money on a better card... :(
scribble
Posts: 5
Joined: Fri Oct 16, 2009 11:01 am

Post by scribble »

Thanks for your help! i may investigate some 8ch cards with a good frame rate, after i test this card to try the zone minder software.
Post Reply