ZoneMinder Forums

I posted over here
http://www.zoneminder.com/forums/viewto ... 3&start=30

But, decided to reload and follow these instructions

http://www.zoneminder.com/forums/viewtopic.php?p=56829

The install went fine.

But, I am getting a red X where the camera image should be. In this version I am missing a path in the source where I would put something like mjpeg.cgi (not really sure what I suppose to use). Anyway, all I have now is a

Remote Host Path: (and I am using this) http://IP/mjpeg.cgi

My log messages show about 1500 lines of info - Just a quick scan didnt really look like anything serious.

I do see this in my zm log

11/11/09 10:53:22.680860 zmdc[3335].INF [Server starting at 09/11/11 10:53:22]
11/11/09 10:53:25.916738 zmdc[3335].INF ['zmc -m 1' starting at 09/11/11 10:53:25, pid = 3357]
11/11/09 10:53:25.953223 zmdc[3335].ERR ['zmc -m 1' exited abnormally, exit status 255]
11/11/09 10:53:26.054201 zmdc[3335].INF [Starting pending process, zmc -m 1]
11/11/09 10:53:26.098945 zmdc[3335].INF ['zmc -m 1' starting at 09/11/11 10:53:26, pid = 3359]
11/11/09 10:53:26.101058 zmdc[3335].ERR ['zmc -m 1' exited abnormally, exit status 255]
11/11/09 10:53:26.213297 zmdc[3335].INF ['zmfilter.pl' starting at 09/11/11 10:53:26, pid = 3360]
11/11/09 10:53:26.613297 zmdc[3335].INF ['zmaudit.pl -c' starting at 09/11/11 10:53:26, pid = 3362]
11/11/09 10:53:27.113297 zmdc[3335].INF ['zmwatch.pl' starting at 09/11/11 10:53:27, pid = 3364]
11/11/09 10:53:27.533301 zmdc[3335].INF ['zmupdate.pl -c' starting at 09/11/11 10:53:27, pid = 3366]
11/11/09 10:53:31.069986 zmdc[3335].INF [Starting pending process, zmc -m 1]
11/11/09 10:53:31.095425 zmdc[3335].INF ['zmc -m 1' starting at 09/11/11 10:53:31, pid = 3378]
11/11/09 10:53:31.103453 zmdc[3335].ERR ['zmc -m 1' exited abnormally, exit status 255]
11/11/09 10:53:41.014775 zmdc[3335].INF [Starting pending process, zmc -m 1]
11/11/09 10:53:41.044814 zmdc[3335].INF ['zmc -m 1' starting at 09/11/11 10:53:41, pid = 3387]
11/11/09 10:53:41.046927 zmdc[3335].ERR ['zmc -m 1' exited abnormally, exit status 255]
11/11/09 10:54:01.073165 zmdc[3335].INF [Starting pending process, zmc -m 1]
11/11/09 10:54:01.103464 zmdc[3335].INF ['zmc -m 1' starting at 09/11/11 10:54:01, pid = 3397]


I also cannot probe the camera

Unable to probe network cameras, status is '127'


Not really sure what to do next. I worked on this all day yesterday and reload and installed today. With no joy.

To get the camera to work I followed the config over a this URL

http://translate.google.com/translate?h ... %26hl%3Den


Then for the camera I choose a Preset camera and changed the camera to my settings.


BTW - Use /video.cgi

I am getting 30.77 FPS!