ubuntu v9.04 / macbook / zoneminder / logitech orbit
Posted: Tue Nov 24, 2009 4:46 am
http://www.zoneminder.com/wiki/index.ph ... _interface
using this guide here. trying to get ubuntu v9.04, logitech orbit and macbook working with zoneminder. I wrote a bit ago but
just getting fustrated because I think all settings are right. Zoneminder was installed without issue,
I installed and setup mysql and apache2 according to the documents on site. When I install a new
monitor (camera) I get no picture at all.
"cheese" and vlc works, I can see the picture by entering /dev/video0
"Cheese" shows UVC camera (046d:0994) (/dev/video0) but zoneminder does not show anything at all. What's going on?
P.s. I couldn't delete it, there is a previous post in hints & tips. I think it was moved for some reason but it needs to be removed from that or moved here
using this guide here. trying to get ubuntu v9.04, logitech orbit and macbook working with zoneminder. I wrote a bit ago but
just getting fustrated because I think all settings are right. Zoneminder was installed without issue,
I installed and setup mysql and apache2 according to the documents on site. When I install a new
monitor (camera) I get no picture at all.
Code: Select all
# lsusb
Bus 001 Device 011: ID 046d:0994 Logitech, Inc. QuickCam Orbit/Sphere AF
Bus 001 Device 004: ID 05ac:8300 Apple, Inc. Built-in iSight (no firmware loaded)
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 006: ID 05ac:1000 Apple, Inc. Bluetooth HCI MacBookPro (HID mode)
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 05ac:8240 Apple, Inc. IR Receiver [build-in]
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 05ac:021a Apple, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Code: Select all
# dmesg | tail
[ 789.816221] usbcore: registered new interface driver uvcvideo
[ 789.816228] USB Video Class driver (v0.1.0)
[ 1131.048141] usb 5-1: USB disconnect, address 5
[ 1131.784088] usb 5-1: new full speed USB device using uhci_hcd and address 6
[ 1131.981209] usb 5-1: configuration #1 chosen from 1 choice
[ 1132.003898] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input20
[ 1132.042579] generic-usb 0003:05AC:1000.000A: input,hidraw1: USB HID v1.11 Keyboard [HID 05ac:1000]
on usb-0000:00:1d.3-1/input0
[ 1132.067516] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input21
[ 1132.104616] generic-usb 0003:05AC:1000.000B: input,hidraw2: USB HID v1.11 Mouse [HID 05ac:1000] on
usb-0000:00:1d.3-1/input1
[ 1380.803393] [drm:i915_getparam] *ERROR* Unknown parameter 6
"cheese" and vlc works, I can see the picture by entering /dev/video0
"Cheese" shows UVC camera (046d:0994) (/dev/video0) but zoneminder does not show anything at all. What's going on?
P.s. I couldn't delete it, there is a previous post in hints & tips. I think it was moved for some reason but it needs to be removed from that or moved here