Hi,
All was well on 1.17.0. I've now upgraded to 1.18.1 and although everyting is working as i expected. I'm no longer getting the video attached to the e-mail.
I've checked the settings as find that the %EV% is there.
And that on the tools option ffmpeg is ticked and is where it thinks it is.
So i've looked in the zmfilter.log and find
Creating notification email
Rate is out of range, 0.25 >= rate <= 10
Sending notification email 'Zone Minder Alarm at Front-Door at 2004-03-11 09:48:09'
Creating notification email
Rate is out of range, 0.25 >= rate <= 10
Sending notification email 'Zone Minder Alarm at Back-Door at 2004-03-11 09:54:54'
Creating notification email
Rate is out of range, 0.25 >= rate <= 10
Sending notification email 'Zone Minder Alarm at Back-Door at 2004-03-11 10:08:24'
i'm also getting broken videos from the create video page. How ever in the zmvideo.log file i dont see any errors.
Creating video file Event-1651.mpg for event 1651
/usr/bin/ffmpeg -y -hq -intra -r 20.82 -s 320x240 -i %03d-capture.jpg Event-1651.mpg > mpeg.log
Input #0, jpeg, from '%03d-capture.jpg':
Stream #0.0: Video: mjpeg, 320x240, 20.82 fps, 800 kb/s
Output #0, mpeg, to 'Event-1651.mpg':
Stream #0.0: Video: mpeg1video (hq), 320x240, 20.82 fps, q=2-31, 200 kb/s
Stream mapping:
Stream #0.0 -> #0.0
Press [q] to stop encoding
frame= 34 q=25.0 size= 122kB time=1.6 bitrate= 612.0kbits/s
frame= 88 q=25.0 size= 326kB time=4.2 bitrate= 631.8kbits/s
frame= 143 q=25.0 size= 532kB time=6.9 bitrate= 634.5kbits/s
frame= 148 q=25.0 size= 550kB time=7.1 bitrate= 633.8kbits/s
Finished Event-1651.mpg
Video file Event-1651.mpg already exists for event 1651
Creating video file Event-1652.mpg for event 1652
/usr/bin/ffmpeg -y -hq -intra -r 25.52 -s 320x240 -i %03d-capture.jpg Event-1652.mpg > mpeg.log
Input #0, jpeg, from '%03d-capture.jpg':
Stream #0.0: Video: mjpeg, 320x240, 25.52 fps, 800 kb/s
Output #0, mpeg, to 'Event-1652.mpg':
Stream #0.0: Video: mpeg1video (hq), 320x240, 25.52 fps, q=2-31, 200 kb/s
Stream mapping:
Stream #0.0 -> #0.0
Press [q] to stop encoding
frame= 49 q=25.0 size= 190kB time=1.9 bitrate= 810.6kbits/s
Finished Event-1652.mpg
Creating video file Event-1639.mpg for event 1639
/usr/bin/ffmpeg -y -hq -intra -r 22.83 -s 320x240 -i %03d-capture.jpg Event-1639.mpg > mpeg.log
Input #0, jpeg, from '%03d-capture.jpg':
Stream #0.0: Video: mjpeg, 320x240, 22.83 fps, 800 kb/s
Output #0, mpeg, to 'Event-1639.mpg':
Stream #0.0: Video: mpeg1video (hq), 320x240, 22.83 fps, q=2-31, 200 kb/s
Stream mapping:
Stream #0.0 -> #0.0
Press [q] to stop encoding
frame= 21 q=25.0 size= 96kB time=0.9 bitrate= 855.0kbits/s
Finished Event-1639.mpg
Is anyone else seeing this.
Regards
Paul
PS Phil, the 8 port card works a treat now that i've got it going.