Page 1 of 1

Trendnet TV-IP110 & TV-IP110W working

Posted: Tue Mar 09, 2010 11:39 pm
by Inaba
I tried to search a number of places to find out about these two cameras and Zoneminder - I found a but about a number of different Trendnet cameras and other branded versions of this same camera, but was unable to find anything concrete on how to get it working.

After some poking around a bit, I can confirm these two cameras work fine in Zoneminder at 22 - 25 FPS. I had to increase my shared memory to 128MB to get these cameras to work at the 640x480 resolution.

Settings are:

Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: <username>:<password>@x.x.x.x
Remote host Port: 80
Remote Host Path: /cgi/mjpg/mjpg.cgi
Remote Image Colors: 24 bit color
Capture Width: 640
Capture Height: 480

Posted: Thu Mar 11, 2010 6:23 pm
by diven
I ordered one of the wireless models from newegg today. Trendnet is giving a $30 rebate until 31-March-2010 for the wireless model which brings the price down to ~$70.

Posted: Tue Mar 16, 2010 11:54 pm
by diven
I have the TV-IP110W working using the same settings and amount of shared memory.

Posted: Sun Sep 26, 2010 1:08 am
by attilahooper
Microcenter currently has the non-wireless models for $79 less $20 mail-in rebate. Mine works fine with the posted settings.

Edit: gonna connect it to my network through some linksys ple200 powerline ethernet adapters.

edit2: summabitdge not liking the linksys ple200's. seems to get a dhcp address but no connectivity.

Re: Trendnet TV-IP110 & TV-IP110W working

Posted: Fri Oct 15, 2010 2:05 pm
by ppyszk
Hi Inaba

What is the firmware version which you are running on the IP-TV110?
I am still not able to make it work
Thanks
P.

TV-IP110 working

Posted: Sun Jan 16, 2011 12:03 am
by w_esco_m
I also have had success with the Trendnet TV-IP110 using zm 1.24.2 on ubuntu 10.04 LTS (lucid).

Critical to making this work was setting the proper shared memory size of 132 MB!! See the zoneminder installation instructions for 10.04.

Firmware version is 1.1.0 build 60.

TV-IP110W

Posted: Sat Jan 22, 2011 10:41 pm
by pete_c
Just got one of these configured with ZM 1.24.2/Ubuntu 10.10. Very nice and fast with about a ~28 FPS connection. This is in a setup of 8 analogue DVR card cams and #3 IP cams (Panasonic and Foscam being the other IP cams). Took all of 5 minutes to configure.

I'm impressed; purchased the TV-IP110W for $69 with free shipping. Decent HW build and very quick IE/FF interface.