ZM with Y-CAm Black ( no video )
Posted: Thu Mar 18, 2010 1:13 pm
Hi All
Ive searched the internet and forums but i can see to get my Y-CAM BLACK to work with ZM
I have added a new source with the following settings:
Source type: Remote
Function: Monitor
Protocol: HTTP
Method: simple
hostname: internal IP
host/port: 80
Host Path: /stream.jpg
width 640
height 680
The logs are mainly empty apart from:
Ive searched the internet and forums but i can see to get my Y-CAM BLACK to work with ZM
I have added a new source with the following settings:
Source type: Remote
Function: Monitor
Protocol: HTTP
Method: simple
hostname: internal IP
host/port: 80
Host Path: /stream.jpg
width 640
height 680
The logs are mainly empty apart from:
18/03/10 12:41:01.008802 zmdc[4921].INF [Server starting at 10/03/18 12:41:01]
18/03/10 12:41:04.486173 zmdc[4921].INF ['zmc -m 3' starting at 10/03/18 12:41:04, pid = 4948]
18/03/10 12:41:05.121176 zmdc[4921].ERR ['zmc -m 3' exited abnormally, exit status 255]
18/03/10 12:41:05.122061 zmdc[4921].INF [Starting pending process, zmc -m 3]
18/03/10 12:41:05.140630 zmdc[4921].INF ['zmc -m 3' starting at 10/03/18 12:41:05, pid = 4950]
18/03/10 12:41:05.277309 zmdc[4921].INF ['zmfilter.pl' starting at 10/03/18 12:41:05, pid = 4951]
18/03/10 12:41:05.859292 zmdc[4921].ERR ['zmc -m 3' exited abnormally, exit status 255]
18/03/10 12:41:06.112913 zmdc[4921].INF ['zmaudit.pl -c' starting at 10/03/18 12:41:06, pid = 4953]
18/03/10 12:41:06.900851 zmdc[4921].INF ['zmwatch.pl' starting at 10/03/18 12:41:06, pid = 4955]
18/03/10 12:41:10.048509 zmdc[4921].INF [Starting pending process, zmc -m 3]
18/03/10 12:41:10.050285 zmdc[4921].INF ['zmc -m 3' starting at 10/03/18 12:41:10, pid = 4959]
18/03/10 12:41:10.500969 zmdc[4921].ERR ['zmc -m 3' exited abnormally, exit status 255]
