AXIS M1011-W - not streaming

[noddy]

Hi,

I have just installed ZM v1.24.2 on a fresh install of Ubuntu and ZM appears to be working.

I have added the M1011-W as a remote monitor but when I open the feed or try to configure the zone there is no image stream.

Could someone provide a working configuration for a M1011-W?

Thanks

[Flasheart]

Have you amended the shared memory setting as shown on the wiki?

Needed for vga ip cameras.

(Once you've got it working, let us know what it's like. I was looking at the new M range yesterday.)

[antuz88]

paste log of /var/log/messages

[henrik]

Could someone provide a working configuration for a M1011-W?

Hi!

Here's my configuration...
-------------
Source type: Remote
Maximum FPS: (not set)

Remote protocol: HTTP
Remote Method: Simple
Remote host: user:password@192.168.0.1
Remote host port: 80
Remote host path: /axis-cgi/mjpg/video.cgi?resolution=640x480&compression=20

Image buffer size: 20
Warmup frames: 10
-------------

Initially i didn't get any stream with 640X480 using default values for image buffer and warmup frames.

Hope this helps


- Henrik

[gorke]

Just get it to work like this:

Remote Protocol: http
Remote Method: simple
hostname: 192.168.0.1 (IP of your camera)
Port: 80
Host Path: / axis-cgi/mjpg/video.cgi? resolution = 320x240 & compression = 20

Color: 24 bits
Width: 320
Height: 240

Max FPS: 30.00
Alarm Max FPS: 25.00


I need to work with 640x480
Anyone?

[osoroco]

Could someone provide a working configuration for a M1011-W?

Hi!

Here's my configuration...
-------------
Source type: Remote
Maximum FPS: (not set)

Remote protocol: HTTP
Remote Method: Simple
Remote host: user:password@192.168.0.1
Remote host port: 80
Remote host path: /axis-cgi/mjpg/video.cgi?resolution=640x480&compression=20

Image buffer size: 20
Warmup frames: 10
-------------

Initially i didn't get any stream with 640X480 using default values for image buffer and warmup frames.

Hope this helps


- Henrik

^THIS finally got some images showing on my zoneminder
a step forward
I have an Axis M3204 and an AXIS Q1755 and this did the trick for both.
Now, if I could only get real video out of them instead of mjpeg that would be awesome

[newvisionantenna]

I just setup FOUR M1011-w cams last night on a single server with rstp/mpeg4.

Protocol RTSP
Method rtp/rtsp/http
host name admin:passwork@ip
port
path /mpeg4/media.amp
640x480

Works fine for me and hit over 30fps. I used the new DVD I put together for my setup.