It appears from the log below that ZM loses the camera conection. I tried to test my camera connection and ZM sees the camera (see second code window below), but it takes almost 30 seconds for ZM to respond to the zmu command - which might be why ZM is giving up on the camera. Normally (after a reboot) this zmu command is instantaneous.
Clues? Help! Thanks
Relevant content from system log:
Code: Select all
Sep 27 02:17:43 zoneminder zmc_dvideo0[32171]: INF [Front_Door: 1930000 - Capturing at 9.80 fps]
Sep 27 08:02:17 zoneminder zma_m1[20823]: INF [Front_Door: 14000 - Processing at 9.80 fps]
Sep 28 02:17:08 zoneminder zma_m1[20823]: INF [Front_Door: 662000 - Processing at 9.90 fps]
Sep 28 02:17:11 zoneminder zmc_dvideo0[32171]: INF [Front_Door: 2782000 - Capturing at 9.90 fps]
Sep 29 02:17:10 zoneminder zmwatch[1549]: INF [Restarting capture daemon for Front_Door, time since last capture 7 seconds (1285741030-1285741023)]
Sep 29 02:17:10 zoneminder zmdc[1502]: INF ['zmc -d /dev/video0' stopping at 10/09/29 02:17:10]
Sep 29 02:17:10 zoneminder zmc_dvideo0[1526]: INF [Got signal 15 (Terminated), exiting]
Sep 29 02:17:17 zoneminder kernel: cx231xx #0: cx231xx_stop_stream():: ep_mask = 8
Sep 29 02:17:18 zoneminder zmdc[1502]: INF ['zmc -d /dev/video0' crashed, signal 8]
Sep 29 02:17:18 zoneminder zmwatch[1549]: INF ['zmc -d /dev/video0' stopping at 10/09/29 02:17:10]
Sep 29 02:17:18 zoneminder zmdc[1502]: INF [Starting pending process, zmc -d /dev/video0]
Sep 29 02:17:18 zoneminder zmdc[1502]: INF ['zmc -d /dev/video0' starting at 10/09/29 02:17:18, pid = 2334]
Sep 29 02:17:18 zoneminder zmdc[2334]: INF ['zmc -d /dev/video0' started at 10/09/29 02:17:18]
Sep 29 02:17:18 zoneminder zmc_dvideo0[2334]: INF [Debug Level = 0, Debug Log = <none>]
Sep 29 02:17:18 zoneminder zmc_dvideo0[2334]: INF [Starting Capture]
Sep 29 02:17:18 zoneminder kernel: cx231xx #0: setPowerMode::mode = 48, No Change req.
Sep 29 02:17:19 zoneminder kernel: cx231xx #0: UsbInterface::sendCommand, failed with status --110
Sep 29 02:17:20 zoneminder kernel: cx231xx #0: UsbInterface::sendCommand, failed with status --110
Sep 29 02:17:21 zoneminder kernel: cx231xx #0: UsbInterface::sendCommand, failed with status --110
Sep 29 02:17:22 zoneminder kernel: cx231xx #0: UsbInterface::sendCommand, failed with status --110
Sep 29 02:17:23 zoneminder kernel: cx231xx #0: UsbInterface::sendCommand, failed with status --110
Code: Select all
Video Device: /dev/video0
General Capabilities
Driver: cx231xx
Card: Hauppauge USB Live 2
Bus: usb-0000:02:02.0-1
Version: 0.0.1
Type: 0x5020011
Supports video capture (X)
Does not support video output
Does not support frame buffer overlay
Supports VBI capture
Does not support VBI output
Does not support sliced VBI capture
Does not support sliced VBI output
Does not support video output overlay
Does not have tuner
Has audio in and/or out
Does not have radio
Supports read/write i/o (X)
Does not support async i/o
Supports streaming i/o (X)
Standards:
NTSC
NTSC-M
NTSC-M-JP
NTSC-M-KR
NTSC-443
PAL
PAL-BG
PAL-H
PAL-I
PAL-DK
PAL-M
PAL-N
PAL-Nc
PAL-60
SECAM
SECAM-B
SECAM-G
SECAM-H
SECAM-DK
SECAM-L
SECAM-Lc
Formats:
16bpp YUY2, 4:2:2, packed (YUYV)
Crop Capabilities
Bounds: 720 x 480
Default: 720 x 480
Current: Cropping is not supported
Inputs: 2
Input 0
Name: Composite1
Type: Camera
Audioset: 00000000
Standards: 0xffffff
Power on (X)
Signal detected (X)
Colour Signal detected
Horizontal Lock detected
Input 1
Name: S-Video
Type: Camera
Audioset: 00000000
Standards: 0xffffff
Power on (X)
Signal detected (X)
Colour Signal detected
Horizontal Lock detected