ZoneMinder Forums

Posted: **Sat Feb 19, 2011 8:01 pm**

OK so i've been trying to get this to work for a while now, i have a 4 channel pci card it is installed and i get a display for video0 channel 0 and as i plug in the other 3 channels i get the same as channel 0. I've unchecked the V4L_MULTI_BUFFER in the config section and also my /etc/modprobe.d/bttv.conf looks like this:

Code: Select all

options bttv gbuffers=32 card=131,131,131,131 tuner=4,4,4,4 radio=0 coring=1 full_luma_range=1 chroma_agc=1 combfilter=1 autoload=0 triton1=0 vsfx=0

which is the tibet pro all of the options on the 4 cameras are all the same ntsc rgb24 for the palette and 352/240 for the aspect ratio

Any ideas of how to get the other channels working?

Posted: **Sat Feb 19, 2011 8:19 pm**

Post a screen shot of 2 of camera config

Also how manny chips does this card have currently you have it set to 4 chips with that config line.

Posted: **Sat Feb 19, 2011 8:49 pm**

it only has one chip but 4 channels it is a single pci card so i will change that and i don't see how to post a picture in here without uploading it to some site..... i have the source as /dev/video0 channel as 1 and format as nts method as video for linux version 1 source type as local

Posted: **Sat Feb 19, 2011 8:52 pm**

here's the updated one and i have rebooted as well...

Code: Select all

options bttv gbuffers=32 card=131 tuner=4 radio=0 coring=1 full_luma_range=1 chroma_agc=1 combfilter=1 autoload=0 triton1=0 vsfx=0

Posted: **Sun Feb 20, 2011 11:57 pm**

any help please this is really troublesome and i can't find the solution anywhere..........

Posted: **Mon Feb 21, 2011 9:55 am**

box.net you can use to send files just upload and hit share file and copy link

post screen shots there

Posted: **Mon Feb 21, 2011 7:43 pm**

http://www.box.net/files#/files/0/f/0/1/f_635619051

http://www.box.net/files#/files/0/f/0/1/f_635619107

ZoneMinder Forums

Same Display all channels

Same Display all channels