Need help with ZoneMinder 1.24.2 - Ubuntu 11.04 Server x64
Posted: Mon Jul 11, 2011 4:25 pm
Hi,
Topic letter limit was too low, so topic here is:
Need help with ZoneMinder 1.24.2 - Ubuntu 11.04 Server x64 and Zones.
I've got cheap dealextreme video card, use Dealextreme search: 15758 (im new user, so cant paste links...)
Computer with Ubuntu 11.04 Server x64 running on it, newest updates and all
Zoneminder 1.24.2
At first I had problems with detection zone blobs, but when I found out it was problem with mootools, I found solution from these forums. Now I can manage zones. After doing some limitations to detection zones, my camera stopped working.
So IF im running with default zone, my camera works in Monitor, Mocord, etc modes without any problems. I can change settings and all goes ok. BUT... when I go change Motion detect zone even a bit, camera stops workinb BUT not right a way. So when I do some changes to motion detection zone and save those, camera stays orange and I can watch it. When moving is detected, it doesnt record anything so motion detect doesnt work. When I go to Camera settings and press save (without any changes) camera turns to red and stays red until all zones are removed and whole computer is rebooted. Zoneminder restart doesnt help.
Im not sure is this problem with zoneminder OR with saa7134 driver, but anyway its a huge problem and weird.
Im not linux guru, so this is huge problem to me. Thanx for advice to anyone who tries help me
--
Tuomo, Finland
Topic letter limit was too low, so topic here is:
Need help with ZoneMinder 1.24.2 - Ubuntu 11.04 Server x64 and Zones.
I've got cheap dealextreme video card, use Dealextreme search: 15758 (im new user, so cant paste links...)
Computer with Ubuntu 11.04 Server x64 running on it, newest updates and all
Zoneminder 1.24.2
At first I had problems with detection zone blobs, but when I found out it was problem with mootools, I found solution from these forums. Now I can manage zones. After doing some limitations to detection zones, my camera stopped working.
So IF im running with default zone, my camera works in Monitor, Mocord, etc modes without any problems. I can change settings and all goes ok. BUT... when I go change Motion detect zone even a bit, camera stops workinb BUT not right a way. So when I do some changes to motion detection zone and save those, camera stays orange and I can watch it. When moving is detected, it doesnt record anything so motion detect doesnt work. When I go to Camera settings and press save (without any changes) camera turns to red and stays red until all zones are removed and whole computer is rebooted. Zoneminder restart doesnt help.
Im not sure is this problem with zoneminder OR with saa7134 driver, but anyway its a huge problem and weird.
Im not linux guru, so this is huge problem to me. Thanx for advice to anyone who tries help me
--
Tuomo, Finland