Edimax IC-3030 series ip cameras
Posted: Fri Oct 07, 2011 9:12 pm
Hi All,
I am confirming the the Edimax IC-3030 works with ZoneMinder quite well, I have a POE and a WiFi camera working.
ZM non default Configuration:
SourceType: Ffmpeg
source Path: addr/mjpg/video.mjpg
Capture width: 1280
Capture height: 1024
Camera non default Configuration:
LAN addressing
Account->anonymous->enable
Video->resolution->MJPEG 1280x1024/highest/3 frames per second
I have a second camera running at 640x480
A note on getting the WiFi working, after configuration, you must pull the RJ45 and re-power the unit to get it attach to the AP.
I have not figured out how to have ZM log into the camera so the camera allows anonymous login anyone has any hints on this?
I'll be trying other configurations and updating this post.
I have the cameras working under the vm appliance and a scratch install 1.25.0
A ZM captured frame is attached.
I am confirming the the Edimax IC-3030 works with ZoneMinder quite well, I have a POE and a WiFi camera working.
ZM non default Configuration:
SourceType: Ffmpeg
source Path: addr/mjpg/video.mjpg
Capture width: 1280
Capture height: 1024
Camera non default Configuration:
LAN addressing
Account->anonymous->enable
Video->resolution->MJPEG 1280x1024/highest/3 frames per second
I have a second camera running at 640x480
A note on getting the WiFi working, after configuration, you must pull the RJ45 and re-power the unit to get it attach to the AP.
I have not figured out how to have ZM log into the camera so the camera allows anonymous login anyone has any hints on this?
I'll be trying other configurations and updating this post.
I have the cameras working under the vm appliance and a scratch install 1.25.0
A ZM captured frame is attached.