ZoneMinder Forums

Apologies if this has been asked before; I've googled and searched this forum and have stuck out so far (although I've been nudged farther along).

I'm running zoneminder 1.24.4 on Fedora Core 15. I'm using a Logitech v-ubk45 which works fine with Cheese.

When I pull up the camera by clicking on the Zone link, I get a black screen outlined with red. When I set the Function to Monitor or Record, then click on the device name the page doesn't ever load all the way. Just see the Device name with a broken link icon next to it.

When I tail /var/log/messages I get this:
Oct 19 15:59:04 suhme zmdc[2899]: INF ['zmc -d /dev/video0' starting at 11/10/19 15:59:04, pid = 3652]
Oct 19 15:59:04 suhme zmdc[3652]: INF ['zmc -d /dev/video0' started at 11/10/19 15:59:04]
Oct 19 15:59:04 suhme zmc_dvideo0[3652]: INF [Debug Level = 0, Debug Log = <none>]
Oct 19 15:59:04 suhme zmc_dvideo0[3652]: INF [New Debug Level = 9, New Debug Log = /var/log/zoneminder/zm_debug_log.03652]
Oct 19 15:59:04 suhme zmc_dvideo0[3652]: INF [Starting Capture]
Oct 19 15:59:04 suhme zmc_dvideo0[3652]: WAR [Hue control is not suppported]
Oct 19 15:59:04 suhme zmc_dvideo0[3652]: WAR [Saturation control is not suppported]
Oct 19 15:59:06 suhme zmc_dvideo0[3652]: INF [Got signal 11 (Segmentation fault), crashing]
Oct 19 15:59:06 suhme zmc_dvideo0[3652]: ERR [Signal address is 0xb708c003, from 0x8061118]
Oct 19 15:59:06 suhme zmc_dvideo0[3652]: ERR [Backtrace: /usr/bin/zmc() [0x8061118]]
Oct 19 15:59:06 suhme zmc_dvideo0[3652]: ERR [Backtrace: /usr/bin/zmc() [0x8061118]]
Oct 19 15:59:06 suhme zmc_dvideo0[3652]: ERR [Backtrace: /usr/bin/zmc() [0x8069330]]
Oct 19 15:59:06 suhme zmc_dvideo0[3652]: ERR [Backtrace: /usr/bin/zmc() [0x804bf54]]
Oct 19 15:59:06 suhme zmc_dvideo0[3652]: ERR [Backtrace: /lib/libc.so.6(__libc_start_main+0xf3) [0x44d95413]]
Oct 19 15:59:06 suhme zmc_dvideo0[3652]: ERR [Backtrace: /usr/bin/zmc() [0x804c359]]
Oct 19 15:59:06 suhme zmc_dvideo0[3652]: INF [Backtrace complete, please execute the following command for more information]
Oct 19 15:59:06 suhme zmc_dvideo0[3652]: INF [addr2line -e /usr/bin/zmc() 0x8061118 0x8061118 0x8069330 0x804bf54 0x44d95413 0x804c359]
Oct 19 15:59:06 suhme zmdc[2899]: ERR ['zmc -d /dev/video0' exited abnormally, exit status 11]
Oct 19 15:59:16 suhme zmdc[2899]: INF [Starting pending process, zmc -d /dev/video0]
Oct 19 15:59:16 suhme zmdc[2899]: INF ['zmc -d /dev/video0' starting at 11/10/19 15:59:16, pid = 3655]
Oct 19 15:59:16 suhme zmdc[3655]: INF ['zmc -d /dev/video0' started at 11/10/19 15:59:16]
Oct 19 15:59:16 suhme zmc_dvideo0[3655]: INF [Debug Level = 0, Debug Log = <none>]
Oct 19 15:59:16 suhme zmc_dvideo0[3655]: INF [New Debug Level = 9, New Debug Log = /var/log/zoneminder/zm_debug_log.03655]
Oct 19 15:59:16 suhme zmc_dvideo0[3655]: INF [Starting Capture]
Oct 19 15:59:16 suhme zmc_dvideo0[3655]: WAR [Hue control is not suppported]
Oct 19 15:59:16 suhme zmc_dvideo0[3655]: WAR [Saturation control is not suppported]
Oct 19 15:59:18 suhme zmc_dvideo0[3655]: INF [Got signal 11 (Segmentation fault), crashing]
Oct 19 15:59:18 suhme zmc_dvideo0[3655]: ERR [Signal address is 0xb6f3e003, from 0x8061118]
Oct 19 15:59:18 suhme zmc_dvideo0[3655]: ERR [Backtrace: /usr/bin/zmc() [0x8061118]]
Oct 19 15:59:18 suhme zmc_dvideo0[3655]: ERR [Backtrace: /usr/bin/zmc() [0x8061118]]
Oct 19 15:59:18 suhme zmc_dvideo0[3655]: ERR [Backtrace: /usr/bin/zmc() [0x8069330]]
Oct 19 15:59:18 suhme zmc_dvideo0[3655]: ERR [Backtrace: /usr/bin/zmc() [0x804bf54]]
Oct 19 15:59:18 suhme zmc_dvideo0[3655]: ERR [Backtrace: /lib/libc.so.6(__libc_start_main+0xf3) [0x44d95413]]
Oct 19 15:59:18 suhme zmc_dvideo0[3655]: ERR [Backtrace: /usr/bin/zmc() [0x804c359]]
Oct 19 15:59:18 suhme zmc_dvideo0[3655]: INF [Backtrace complete, please execute the following command for more information]
Oct 19 15:59:18 suhme zmc_dvideo0[3655]: INF [addr2line -e /usr/bin/zmc() 0x8061118 0x8061118 0x8069330 0x804bf54 0x44d95413 0x804c359]
Oct 19 15:59:18 suhme zmdc[2899]: ERR ['zmc -d /dev/video0' exited abnormally, exit status 11]
Oct 19 15:59:27 suhme zmwatch[2946]: INF [Restarting capture daemon for Logitech1, time since last capture 9 seconds (1319054367-1319054358)]
Oct 19 15:59:27 suhme zmdc[2899]: INF ['zmc -d /dev/video0' starting at 11/10/19 15:59:27, pid = 3661]
Oct 19 15:59:27 suhme zmdc[3661]: INF ['zmc -d /dev/video0' started at 11/10/19 15:59:27]
Oct 19 15:59:27 suhme zmc_dvideo0[3661]: INF [Debug Level = 0, Debug Log = <none>]
Oct 19 15:59:27 suhme zmc_dvideo0[3661]: INF [New Debug Level = 9, New Debug Log = /var/log/zoneminder/zm_debug_log.03661]
Oct 19 15:59:27 suhme zmc_dvideo0[3661]: INF [Starting Capture]
Oct 19 15:59:27 suhme zmc_dvideo0[3661]: WAR [Hue control is not suppported]
Oct 19 15:59:27 suhme zmc_dvideo0[3661]: WAR [Saturation control is not suppported]
Oct 19 15:59:29 suhme zmc_dvideo0[3661]: INF [Got signal 11 (Segmentation fault), crashing]
Oct 19 15:59:29 suhme zmc_dvideo0[3661]: ERR [Signal address is 0xb6fd4003, from 0x8061118]
Oct 19 15:59:29 suhme zmc_dvideo0[3661]: ERR [Backtrace: /usr/bin/zmc() [0x8061118]]
Oct 19 15:59:29 suhme zmc_dvideo0[3661]: ERR [Backtrace: /usr/bin/zmc() [0x8061118]]
Oct 19 15:59:29 suhme zmc_dvideo0[3661]: ERR [Backtrace: /usr/bin/zmc() [0x8069330]]
Oct 19 15:59:29 suhme zmc_dvideo0[3661]: ERR [Backtrace: /usr/bin/zmc() [0x804bf54]]
Oct 19 15:59:29 suhme zmc_dvideo0[3661]: ERR [Backtrace: /lib/libc.so.6(__libc_start_main+0xf3) [0x44d95413]]
Oct 19 15:59:29 suhme zmc_dvideo0[3661]: ERR [Backtrace: /usr/bin/zmc() [0x804c359]]
Oct 19 15:59:29 suhme zmc_dvideo0[3661]: INF [Backtrace complete, please execute the following command for more information]
Oct 19 15:59:29 suhme zmc_dvideo0[3661]: INF [addr2line -e /usr/bin/zmc() 0x8061118 0x8061118 0x8069330 0x804bf54 0x44d95413 0x804c359]
Oct 19 15:59:29 suhme zmdc[2899]: ERR ['zmc -d /dev/video0' exited abnormally, exit status 11]


I do have to admit that when adding the camera I'm not 100% sure what settings to use. I've done trial and error for a while with no success, but I'm not a A/V guy so I'm kind of lost on that front. zmu doesn't seem to provide very much info for me:

[root@suhme ~]# zmu -d /dev/video0 -V1 --query --verbose
Video Device: /dev/video0
[root@suhme ~]#


Any help is appreciated.


-Jake

Issue seems to have been resolved

After more searching I found the Forum post titled "Logitech QuickCam Connect E2500 (089d) - Ubuntu Server 10.04" and followed their instructions to add:
to /usr/bin/zmdc.pl

After a reload of zoneminder I am able to view my camera. It's hard to tell because it's so dark and crappy out in Michigan right now, but once I verify that it works good, i shall dance a happy jig!