Can't get RTSP working in v1.24.2
Posted: Wed Feb 01, 2012 7:54 am
As per the title I am having grate problems getting RTSP working within zoneminder v1.24.2.
My Current ZoneMinder Server.
Tyan Thunder K8SD Pro S2882-D Motherboard.
2x Dual Core AMD Opteron 275 Processor (2.2Ghz).
4x 2GB DDR400 ECC Memory (8GB).
1x Seagate 500GB. (OS Drive).
1x WDC Green 1.5TB. (Spare).
2x WDC Green 2.0TB. (Raid-1, Zoneminder Events).
1x 4 Port Single Chip BT878.
Running Ubuntu 11.04 x64 Server, Zoneminder v1.24.2.
/etc/sysctl.conf
I did put a post in the Hardware Queries but not had any replies.
Here is that post: Xvision X100V MegaPixel Indoor/Outdoor IP Camera
Right down to the problem.
I have entered the following into zoneminder, but get no video stream from the ip camera.
Source
Remote Protocol: RTSP
Remote Method: RTP/RTSP/HTTP
Remote Host Name: xxx.xxx.xxx.xxx
Remote Host Port: 554
Remote Host Path: /media/media.amp?videocodec=jpeg&resolution=640x480&audio=0
Remote Image Colours: 24 bit colour
Capture Width (pixels): 640
Capture Height (pixels): 480
Preserve Aspect Ratio: Unticked
Orientation: Normal
Within zoneminder the Source turns Orange, if you refresh the page it then turns Red.
Reading the X100V RTSP manual
All of the above rtsp work within VLC media player, but not ZoneMinder.
Looking at the logs of the IP camera it's self, show the remote rtsp feed request and that the camera starts sending the video stream.
What logs do I have to look at on the zoneminder server?
Xvision does have two live demo camera's that can be viewed here: http://www.ipcctv.com/article.php?xArt=14
Can someone please advice what I should do to try and get this working.
Thanks for your time.
Best Regards.
My Current ZoneMinder Server.
Tyan Thunder K8SD Pro S2882-D Motherboard.
2x Dual Core AMD Opteron 275 Processor (2.2Ghz).
4x 2GB DDR400 ECC Memory (8GB).
1x Seagate 500GB. (OS Drive).
1x WDC Green 1.5TB. (Spare).
2x WDC Green 2.0TB. (Raid-1, Zoneminder Events).
1x 4 Port Single Chip BT878.
Running Ubuntu 11.04 x64 Server, Zoneminder v1.24.2.
/etc/sysctl.conf
Code: Select all
# Shared Memory For Zoneminder
kernel.shmmax = 4162813952
kernel.shmall = 2032624
Here is that post: Xvision X100V MegaPixel Indoor/Outdoor IP Camera
Right down to the problem.
I have entered the following into zoneminder, but get no video stream from the ip camera.
Source
Remote Protocol: RTSP
Remote Method: RTP/RTSP/HTTP
Remote Host Name: xxx.xxx.xxx.xxx
Remote Host Port: 554
Remote Host Path: /media/media.amp?videocodec=jpeg&resolution=640x480&audio=0
Remote Image Colours: 24 bit colour
Capture Width (pixels): 640
Capture Height (pixels): 480
Preserve Aspect Ratio: Unticked
Orientation: Normal
Within zoneminder the Source turns Orange, if you refresh the page it then turns Red.
Reading the X100V RTSP manual
Code: Select all
New RTSP URL format
H264
rtsp://xxx.xxx.xxx.xxx:554/media/media.amp?videocodec=h264&resolution=640x480&audio=0
MPEG4
rtsp://xxx.xxx.xxx.xxx:554/media/media.amp?videocodec=mpeg4&resolution=640x480&audio=0
MJPEG
rtsp://xxx.xxx.xxx.xxx:554/media/media.amp?videocodec=jpeg&resolution=640x480&audio=0
-------------------------------------------------------------------------------------
Old RTSP URL format
H264
rtsp://xxx.xxx.xxx.xxx:554/h264/media.amp?resolution=640x480
rtsp://xxx.xxx.xxx.xxx:554/h264/1/media.amp?resolution=640x480
MPEG4
rtsp://xxx.xxx.xxx.xxx:554/mpeg4/media.amp
rtsp://xxx.xxx.xxx.xxx:554/mpeg4/media.amp?resolution=640x480
rtsp://xxx.xxx.xxx.xxx:554/mpeg4/1/media.amp
rtsp://xxx.xxx.xxx.xxx:554/mpeg4/1/media.amp?resolution=640x480
MJPEG
rtsp://xxx.xxx.xxx.xxx:554/mjpg/video.mjpg?resolution=640x480
rtsp://xxx.xxx.xxx.xxx:554/mjpg/1/video.mjpg?resolution=640x480
3GPP
rtsp://xxx.xxx.xxx.xxx:554/mpeg4/media.3gp
Looking at the logs of the IP camera it's self, show the remote rtsp feed request and that the camera starts sending the video stream.
What logs do I have to look at on the zoneminder server?
Xvision does have two live demo camera's that can be viewed here: http://www.ipcctv.com/article.php?xArt=14
Can someone please advice what I should do to try and get this working.
Thanks for your time.
Best Regards.