Unable to run 3 camera's at the same time

Forum for questions and support relating to the 1.25.x releases only.
Locked
skerit
Posts: 7
Joined: Sat Feb 02, 2008 12:29 am

Unable to run 3 camera's at the same time

Post by skerit »

I'm trying to set up a system with 3 usb capture devices.
I can always get 2 devices to work, but a third fails.

It doesn't matter if I'm using them on a small or big resolution (320x288 versus 720x576)
Only 2 will work

I have already set the shmmax and shmall values, to very generous settings.
(kernel.shmall = 1536870912 & kernel.shmmax = 3036870912)

Here's the log output:

Code: Select all

Starting pending process, zmc -d /dev/video2
'zmc -d /dev/video2' starting at 12/10/12 01:27:34, pid = 2922
'zmc -d /dev/video2' started at 12/10/12 01:27:34
Starting Capture
Capture failure, possible signal loss?: Input/output error
Failed to capture image from monitor 3 (0/1)
'zmc -d /dev/video2' exited abnormally, exit status 255
I'm using the zoneminder version found in the ubuntu 12.04 repository, which is 1.25.
Locked