Nilox NetWideye 300

[egnet]

has somebody managed to use a Nilox NetWideye 300 wireless pan/tilt camera with zoneminder? I can't.

This is what i did:
Add New remote monitor
remote host name "192.168.1.6" (ip of the camera)
remote host path "/snapshot.cgi" (path to the snapshot made by the camera)
(if i connect to "http : / / 192.168.1.6/snapshot.cgi" i see just a picture as it should be)

I set also width and height and that's it.
I think it's correct but if I try to see the monitor i just see a black square.

I did something wrong?
Did somebody else tried to configure this camera?

Thanks

[fabietto]

try to use remote host path "/videostream.cgi"
and if you set login and password to enter in camera configuration panel use remote host name: user:password@192.168.1.6

[egnet]

I tried everything you suggested.
If i try to access directy ... (user:pass@host/path)
videostream.cgi is correct and it shows the video stream as it is supposed to do.
snashot.cgi just shows a static picture.

but still i cant see anything, just a black square, nothing else.

On the camera i added a new user with a password (i tried even with no password).
I setup zoneminder to access user:password@ipaddress but it seems to be not working.

If i check camera logs i see that user had access (approx every 10 seconds).
Maybe there are some missing dependencies? I am running derbian.

Thanks
Enrico

[PacoLM]

Check your shared memory settings, if not, post logs.

[egnet]

I didnt change shared memory settings on zoneminder.
It's at default value 0x7a6d0000

which log you want to see?

[PacoLM]

Stop your system, restart it and copy/paste here the /var/log/syslog file content from the start time.