Strange loss of web interface
Posted: Tue Apr 01, 2014 2:23 am
I built a new computer a couple weeks ago, installed Peppermint Linux ( really, it's mostly Ubuntu ) and then zoneminder.
It took a bit to figure out the USB cam, but I got it working and it ran fine for a couple weeks. The computer sits in my living room by the TV and the camera watches the dogs during the day. Since i now have a web server accessible from outside ( I put the box in the DMZ, and use dynamic DNS to point a domain to it), I decided to add a photo gallery and a blog to it.
So far, so good.
Then, I installed Postfix and Dovecot, and Zoneminder broke.
Now, zm IS watching the camera, capturing events. The disk is NOT full, not by a long shot.
I have gone so far as to uninstall, remove the databases, reinstall, and reconfigure. Still, the same issues. It's as if the web interface is unable to monitor ZM.
The logs have lots of this: (nothing interesting)
I have googled every combination of keywords I can think of, and haven't come up with anyone addressing this problem and no idea even what's wrong.
I did lose cambozola in the delete and reinstall, but without the interface working, I wasn't going to bother working on it. I don't really want to wipe the hard drive and start over. I have a good 40 hours of work into the gallery, mail server, etc, I don't really don't want to re-do it (though it would involved much less trial and error in getting around my ISP's blocking of port 25).
Can anyone give me hints, suggestions, ideas.. ???
I have screen shots of various things, but the forum won't let me post the urls.
You can find the images at: farfromhome dot us in /served as zmlog.png and zmshot.png
It took a bit to figure out the USB cam, but I got it working and it ran fine for a couple weeks. The computer sits in my living room by the TV and the camera watches the dogs during the day. Since i now have a web server accessible from outside ( I put the box in the DMZ, and use dynamic DNS to point a domain to it), I decided to add a photo gallery and a blog to it.
So far, so good.
Then, I installed Postfix and Dovecot, and Zoneminder broke.
Now, zm IS watching the camera, capturing events. The disk is NOT full, not by a long shot.
Code: Select all
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/peppermint--vg-root 959528376 234579940 676200508 26% /
none 4 0 4 0% /sys/fs/cgroup
udev 1571384 12 1571372 1% /dev
tmpfs 316268 1380 314888 1% /run
none 5120 0 5120 0% /run/lock
none 1581332 36004 1545328 3% /run/shm
none 102400 16 102384 1% /run/user
/dev/sda1 233191 30394 190356 14% /boot
The logs have lots of this: (nothing interesting)
I have googled every combination of keywords I can think of, and haven't come up with anyone addressing this problem and no idea even what's wrong.
I did lose cambozola in the delete and reinstall, but without the interface working, I wasn't going to bother working on it. I don't really want to wipe the hard drive and start over. I have a good 40 hours of work into the gallery, mail server, etc, I don't really don't want to re-do it (though it would involved much less trial and error in getting around my ISP's blocking of port 25).
Can anyone give me hints, suggestions, ideas.. ???
I have screen shots of various things, but the forum won't let me post the urls.
You can find the images at: farfromhome dot us in /served as zmlog.png and zmshot.png