Xiaoyi Yi ANTS
Posted: Sat Oct 24, 2015 9:37 pm
Hi !
Anyone got Xiaoyi Yi Ants working with Zone Minder ? I have firmware 1.8.5.1F and I can access to the RTSP stream throught rtsp://camera_ip_or_name:554/ch0_0.h264 without password.
I configured the camera as a remote source type with the following parameters :
Remote Protocol : RTSP
Remote Method : RTP/RTSP
Remote Host Name : camera_ip_or_name
Remote Host Port : 554
Remote Host Path : /ch0_0.h264
Target Colorspace : 24 bit colour
Capture Width (pixels) : 1280
Capture Height (pixels) : 720
Preserve Aspect Ratio : Not checked
Orientation : Normal
Deinterlacing : Disabled
When starting zoneminder, I get the following message (I don't really get its meaning) :
Does someone have a clue ?
Thanks for your attention !
Best regards,
Me
Anyone got Xiaoyi Yi Ants working with Zone Minder ? I have firmware 1.8.5.1F and I can access to the RTSP stream throught rtsp://camera_ip_or_name:554/ch0_0.h264 without password.
I configured the camera as a remote source type with the following parameters :
Remote Protocol : RTSP
Remote Method : RTP/RTSP
Remote Host Name : camera_ip_or_name
Remote Host Port : 554
Remote Host Path : /ch0_0.h264
Target Colorspace : 24 bit colour
Capture Width (pixels) : 1280
Capture Height (pixels) : 720
Preserve Aspect Ratio : Not checked
Orientation : Normal
Deinterlacing : Disabled
When starting zoneminder, I get the following message (I don't really get its meaning) :
Code: Select all
2015-10-24 23:30:26.356321 zmc_m9 25928 FAT Unable to get RTP Info identifier from response 'RTSP/1.0 200 OK CSeq: 3 Session: 2708C9AF Range: npt=now- ' /home/rav/ZoneMinder-1.28.0/src/zm_rtsp.cpp 549Thanks for your attention !
Best regards,
Me
