ZoneMinder Forums

Posted: **Thu Nov 12, 2015 2:20 pm**

Hi,
I can start the ZM package but it hangs with "


Unable to connect to ZM db.SQLSTATE[HY000] [1045] Access denied for user 'zmuser'@'localhost' (using password: YES)

"

I accidentally answered yes when the PW question came up during the install.
How can i fix the database so zm will run.

I know nothing of SQL so be basic.

Posted: **Thu Nov 12, 2015 6:37 pm**

http://www.cyberciti.biz/faq/mysql-chan ... -password/

I suppose that changing it to the root password may work.

Posted: **Thu Nov 12, 2015 9:28 pm**

I am assuming that you are referring to the sql root password setting during it's install?

Have you checked the readme file with the package, normally has instructions for DB setup etc, including creating the zmuser account. Example of one below
https://github.com/ZoneMinder/ZoneMinde ... DME.Fedora
Actual user creation step. But please read the readme to get it all correct.
mysql -u root -p mysql> grant select,insert,update,delete,lock tables,alter,create on zm.* to 'zmuser'@localhost identified by 'zmpass';

zm will be using details from zm.conf, in /etc/zoneminder or /etc/zm, not so sure on Fedora. Normally zmuser and zmpass as per the SQL above, but possible to change if you change in sql and zm.conf.

Posted: **Fri Nov 13, 2015 2:13 pm**

Hi,

Well, i deleted the ZM database so i could re-install it. The bad news is i cannot create a fresh one, don't know how.
I tried ( mysql -u root -p < /usr/share/zoneminder/db/zm_create.sql) and had no luck. So i am studying the links given for another way.

ps: I am Using Fedora 23 and 128.1 for ZM. Installed via RPM

Thanks, George!

Posted: **Sat Nov 14, 2015 4:45 am**

If you are using an rpm from standard repo it doesn't include ffmpeg, which hampers ability to do some key functions.

http://zmrepo.zoneminder.com has better builds with ffmpeg, but no 23 yet, so if you are not comfortable building your own from the fedora 22 version maybe hold off, roll back or swap distro.

Posted: **Sat Nov 14, 2015 8:24 pm**

Hi,

Thanks! I have used exactly that rpm for my install and pulled ffmpeg from that site. so i am happy with that..

It's the idiot that deleted that db. (me): I have what is a builder file but don't know how to use it. to create the database.

Code: Select all

zm_create.sql         zm_update-1.19.2.sql  zm_update-1.23.2.sql
zm_update-0.0.1.sql   zm_update-1.19.3.sql  zm_update-1.23.3.sql
zm_update-0.9.10.sql  zm_update-1.19.4.sql  zm_update-1.24.0.sql
zm_update-0.9.11.sql  zm_update-1.19.5.sql  zm_update-1.24.1.sql
zm_update-0.9.12.sql  zm_update-1.20.0.sql  zm_update-1.24.2.sql
zm_update-0.9.13.sql  zm_update-1.20.1.sql  zm_update-1.24.3.sql
zm_update-0.9.15.sql  zm_update-1.21.0.sql  zm_update-1.24.4.sql
zm_update-0.9.16.sql {code]

How do i use that kind of file?

Thanks! george

Posted: **Sun Nov 15, 2015 2:12 am**

OK so the command about mysql -u root -p < /usr/share/zoneminder/db/zm_create.sql should be the one. It should ask for mysql root password, you said it didn't work so give details of what happened.
Readme for that rpm.
https://github.com/ZoneMinder/ZoneMinde ... DME.Fedora

Also you might get more hits/help in 1.28 forum, I will see if we can get a mod to move this topic. This area is more for posting a hint or tip as opposed to getting one.

Posted: **Sun Nov 15, 2015 3:23 pm**

Hi,

The command does cause a pause, ask for the password and then the command prompt just as expected. however i find no hint of it having done anything. The database is not affected one way or another that i can tell. It is just not populating.

Do you suppose i should rename the current zm database and start all over again

Thanks

Posted: **Mon Nov 16, 2015 11:58 am**

So now you have got me confused. You have a zm db, but say zm_create is not doing anything? It creates the db structure so if you have db with tables then it's job is done. Does that sound like where you are?
After that you need to create a user to access the database, check here to see if you already have zmuser

Code: Select all

select User,Host from mysql.user;

To create the user if they don't exist

Code: Select all

grant select,insert,update,delete,lock tables,alter,create on zm.* to 'zmuser'@localhost identified by 'zmpass';

So that creates a user called zmuser and password zmpass, if you don't know the password delete the account and recreate it. Just google mysql delete user for that if you need it.
If you want a different account for DB then change zmuser and zmpass in creation above, then follow below from the fedora readme.

If you have chosen to change the zoneminder database account credentials to something other than zmuser/zmpass, you must now edit /etc/zm/zm.conf. Change ZM_DB_USER and ZM_DB_PASS to the values you created in the previous step.

Posted: **Tue Nov 17, 2015 4:19 pm**

Hi,

I am happy to say half the problems have been solved. I have been trying to load a blank database. Still cant fathom how that happened. Just happened to notice the file size 1k.

Anyway i will be applying your advice with a new file and will see if that helps.

I do have the db password modified. But i don't feel as though I'm that far into the solution yet.

Thanks for your patience
I will post an update as soon possible.

Posted: **Tue Nov 17, 2015 6:57 pm**

Hi,

After running through the iterations of the command. I found the following reported errors.

#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near '@ZM_MYSQL_ENGINE@' at line 16

Notice in ./../php/SqlParser/Lexer.php#809
Uninitialized string offset: 459

-- MySQL dump 10.13 Distrib 5.6.13, for Linux (i686)
--
-- Host: localhost Database: @ZM_DB_NAME@
-- ------------------------------------------------------
-- Server version 5.6.13

/*!40101 SET @OLD_CHARACTER_SET_CLIENT=@@CHARACTER_SET_CLIENT */;
/*!40101 SET @OLD_CHARACTER_SET_RESULTS=@@CHARACTER_SET_RESULTS */;
/*!40101 SET @OLD_COLLATION_CONNECTION=@@COLLATION_CONNECTION */;
/*!40101 SET NAMES utf8 */;
/*!40014 SET @OLD_UNIQUE_CHECKS=@@UNIQUE_CHECKS, UNIQUE_CHECKS=0 */;
/*!40014 SET @OLD_FOREIGN_KEY_CHECKS=@@FOREIGN_KEY_CHECKS, FOREIGN_KEY_CHECKS=0 */;
/*!40101 SET @OLD_SQL_MODE=@@SQL_MODE, SQL_MODE='NO_AUTO_VALUE_ON_ZERO' */;
/*!40111 SET @OLD_SQL_NOTES=@@SQL_NOTES, SQL_NOTES=0 */;

--
-- Current Database: `@ZM_DB_NAME@`;
--

CREATE DATABASE /*!32312 IF NOT EXISTS*/ `@ZM_DB_NAME@`;

USE `@ZM_DB_NAME@`;

Hope this helps, I haven't a clew as to what may be wrong!

thanks!
george

Posted: **Tue Nov 17, 2015 8:26 pm**

Only theory I have on that is you are not looking at a packaged distribution.
Part of the make process for zoneminder takes this line
CREATE DATABASE /*!32312 IF NOT EXISTS*/ `@ZM_DB_NAME@`;
And inserts the correct name for the db, and a bunch of other stuff. End result is would look like this.
CREATE DATABASE /*!32312 IF NOT EXISTS*/ `zm`;

All I can think is your taking fedora 22 rpm from zmrepo and putting on 23 isn't working out as it should. Since then zmrepo has 23 released now, so if you are not attached to this build I would ditch it and bring up a new one from scratch and then install from zmrepo version.

http://zmrepo.zoneminder.com/f/23/x86_64/

Posted: **Wed Nov 18, 2015 8:04 am**

Hi,
Thanks, that is the best explanation I've heard yet. All else looks good. I basicly took a clean fc23 install and loaded Apache, MariaDB and zoneminder. from the zm repository. that could have been maybe 1 week ago so a mix of files is possible.

Would you recommend compiling or RPMing the install. I have a limited knowledge if compiling anything but am game for most anything.

Thanks again for your help. It would have been hopeless otherwise....

george....

Posted: **Wed Nov 18, 2015 11:33 am**

RPM should take care of everything, I am not a fedora user but plenty around. If you are get stuck with the zmrepo stuff ask in the forum section linked below, more people in there and proper place for questions and discussion on 1.28 installation.

viewforum.php?f=32

Posted: **Wed Nov 18, 2015 1:57 pm**

I know you can't believe it but it works! Just need to add a couple of cameras and it's off to the races.

What i did was delete and re install 1.28, change the password to match mine and bingo

ZoneMinder Forums

Password MYSQL and starting ZM

Password MYSQL and starting ZM

Re: Password MYSQL and starting ZM

Re: Password MYSQL and starting ZM

Re: Password MYSQL and starting ZM

Re: Password MYSQL and starting ZM

Re: Password MYSQL and starting ZM

Re: Password MYSQL and starting ZM

Re: Password MYSQL and starting ZM

Re: Password MYSQL and starting ZM

Re: Password MYSQL and starting ZM

Re: Password MYSQL and starting ZM

Re: Password MYSQL and starting ZM

Re: Password MYSQL and starting ZM

Re: Password MYSQL and starting ZM

Re: Password MYSQL and starting ZM