ZoneMinder Forums

Dear All,

Newbie on zoneminder... running on a VM Debian 9.2.1, hosted on Esxi 6.5
Everything is OK
But (always a 'but')
I am not able to control my cams.
In the control tab, I'm not sure what to set exactly.
Address : I put a cam ip. Do I need to put the port as well like 192.168.1.10:81 or only IP

Type I select wanscam HW0025 but I edit it before as my cam are working that way :
For move up : /decoder_control.cgi?command=0&onestep=0&user=#username#&pwd=#password#

I've discovered this viewtopic.php?f=29&t=21198&p=80309&hili ... rol#p80309
So I modify like that but still don't work

Don't know where to check now... So if one of you can help. Will be much appreciated
Cheers

I have a old panasonic ptz camera and here are my settings. Not sure weather you need to tweek these:

controllable: checked
control type: panasonic IP
control address: {username:password}@{ip:port}
others are all default values.

HTH

Hi,

I'll try this in the control tab... (if I am lucky, the perl script will be able to move my cam )

Hi again,

I tried again and again without success.
So if one of you have a way to fix this, this wll be great

Did you ever get this resolved?