digoo BB-M1 connexion string
Posted: Wed Jul 17, 2019 6:52 pm
New to ZM, but learning !
Not sure where to share this info.
In order to view to a digoo BB-M1 camera, i used successfully the following :
Ffmpeg
source :
path: rtsp://[user]:[password]@[ip adresse]:554/user=[user]_password=[password]_channel=1_stream=[xyz].sdp?real_stream
method: UDP
color: 24bit
1280X720
ps: [xyz] = 0 for full stream of 1280X720, or 1 for half stream of 640X360
working on: can only see one camera so far (/dev/shm does have 1G and run at less than 50% all the time ) , hopefully i'll find what's wrong. chears
Not sure where to share this info.
In order to view to a digoo BB-M1 camera, i used successfully the following :
Ffmpeg
source :
path: rtsp://[user]:[password]@[ip adresse]:554/user=[user]_password=[password]_channel=1_stream=[xyz].sdp?real_stream
method: UDP
color: 24bit
1280X720
ps: [xyz] = 0 for full stream of 1280X720, or 1 for half stream of 640X360
working on: can only see one camera so far (/dev/shm does have 1G and run at less than 50% all the time ) , hopefully i'll find what's wrong. chears