ZoneMinder Forums

Posted: **Mon Dec 30, 2019 5:43 pm**

hello

iam trying to add my UNV IPC2125 OnVIF camera

it appears in detected cameras list

: camera_select.JPG (50.22 KiB) Viewed 7607 times

but after selecting no profile is detected

: detected_profile.JPG (32.02 KiB) Viewed 7607 times

iam trying to add it manually

i can view camera on player with link:
rtsp://admin:123456@192.168.1.6:554

i have no experience with zoneminder
version is: 1.33.16

camera settings:

: Camera.JPG (54.06 KiB) Viewed 7607 times

Posted: **Mon Dec 30, 2019 5:44 pm**

i tried these manual configuration but also not connected

: zm setting 1.JPG (61.58 KiB) Viewed 7606 times

: zm setting 2.JPG (53.24 KiB) Viewed 7606 times

Thanks

Posted: **Mon Dec 30, 2019 10:30 pm**

Remove max FPS on zoneminder. Leave blank.

Change method to TCP.

You can use FFMPEG or LibVLC for rtsp.

Test in ffmpeg from command line, to get resolution and confirm it works.

See https://wiki.zoneminder.com/Finding_Camera_Stream_Paths

If you are on RPI, lower FPS on camera.

Posted: **Mon Dec 30, 2019 11:03 pm**

thanks for response

this configuration worked but not stable

how can i make it better?

: Config2.JPG (52.95 KiB) Viewed 7585 times

: Config1.JPG (60.29 KiB) Viewed 7585 times

: Camera1.JPG (50.25 KiB) Viewed 7585 times

ZoneMinder Forums

Problem while Adding OnVif camera

Problem while Adding OnVif camera

Re: peoblem while Adding OnVif camera

Re: peoblem while Adding OnVif camera

Re: peoblem while Adding OnVif camera