Recording not working properly after upgrade to 1.34

Forum for questions and support relating to the 1.34.x releases only.
Post Reply
sblectric
Posts: 2
Joined: Thu Mar 05, 2020 6:44 pm

Recording not working properly after upgrade to 1.34

Post by sblectric »

I upgraded my Zoneminder from 1.30 to 1.34 and monitoring still works great, however I am getting camera disconnect/reconnect errors that I was not getting before when I try to record. New events are created every few seconds due to this.

Relevant log excerpt:

Code: Select all

03/05/20 13:41:55.923238 zma_m1[17454].INF-zm_monitor.cpp/1615 [Front Yard: 2584 - Opening new event 173707, alarm start]
03/05/20 13:41:56.149892 zma_m1[17454].INF-zm_monitor.cpp/1648 [Front Yard: 2585 - Gone into alert state]
03/05/20 13:41:56.584904 zma_m1[17454].WAR-zm_monitor.cpp/1423 [Signal: Lost]
03/05/20 13:41:56.636492 zma_m1[17454].INF-zm_monitor.cpp/1425 [Front Yard: 2602 - Closing event 173707, signal loss]
03/05/20 13:41:56.780678 zma_m1[17454].WAR-zm_monitor.cpp/1423 [Signal: Reacquired]
03/05/20 13:41:56.815380 zma_m1[17454].INF-zm_monitor.cpp/1564 [Front Yard: 2603 - Gone into alarm state PreAlarmCount: 0 > AlarmFrameCount:1 Cause:Signal]
03/05/20 13:41:56.914653 zma_m1[17454].INF-zm_monitor.cpp/1615 [Front Yard: 2603 - Opening new event 173708, alarm start]
03/05/20 13:41:57.124671 zma_m1[17454].INF-zm_monitor.cpp/1648 [Front Yard: 2604 - Gone into alert state]
03/05/20 13:41:59.559947 zma_m1[17454].WAR-zm_monitor.cpp/1423 [Signal: Lost]
03/05/20 13:41:59.596834 zma_m1[17454].INF-zm_monitor.cpp/1425 [Front Yard: 2668 - Closing event 173708, signal loss]
03/05/20 13:41:59.730662 zma_m1[17454].WAR-zm_monitor.cpp/1423 [Signal: Reacquired]
03/05/20 13:41:59.789194 zma_m1[17454].INF-zm_monitor.cpp/1564 [Front Yard: 2669 - Gone into alarm state PreAlarmCount: 0 > AlarmFrameCount:1 Cause:Signal]
I am not trying to motion detect or anything, just want a continuous recording which worked flawlessly before upgrading.

Cam used is a HOSAFE ethernet camera using an RTSP 264 stream.

Am I missing something?
User avatar
iconnor
Posts: 3335
Joined: Fri Oct 29, 2010 1:43 am
Location: Toronto
Contact:

Re: Recording not working properly after upgrade to 1.34

Post by iconnor »

what is interesting is you posted the motion detection logs and not the capturing logs.
sblectric
Posts: 2
Joined: Thu Mar 05, 2020 6:44 pm

Re: Recording not working properly after upgrade to 1.34

Post by sblectric »

Could it be trying to motion detect for some reason? I attached a screenshot of part of the event list below.
Attachments
zm-event-example.png
zm-event-example.png (259.4 KiB) Viewed 2972 times
Post Reply