Problem with POE camera

[Rodz]

Hello,

I use multiple cameras in streamed in zoneminder, 5 exactly, but I don't know why, only one is live at a time, impossible to have the stream streamed of all 5 at the same time.

I think there must be a line to add in one of the .conf files or maybe something else to do that I don't know.

I have 5 POE IP cameras which are connected to a POE switch then connected on the network to a raspberry.
It is the raspberry which makes the server under LAMP, then I installed zoneminder.
In terms of settings, I use the ffmpeg with the path:

rtsp://:@IP_of_camera:554/user=admin_password=admin_channel=1_stream=0.sdp?real_stream

only that works because if I configure on "remote" with the protocol "http" and the IP address I do not have an image.

More over if I type the IP address of the camera in the browser I get a page in Chinese and I have no display.

Do you have an idea ?
thank you in advance for your answers.


Charge: 0.16 storage DB:6/151 Storage: Default: 5%, Stockage: 5% /dev/shm: 9%

[dougmccrary]

Not a website issue.
Post in the forum for the version of ZM you're using.

[parky]

Based on other recent posts it possibly won't run more than one at a time as you haven't enough resource in a RPi especially if you haven't throttled the cameras output

As mentioned more detail on your setup is required and it might be worth having a read through the https://zoneminder.readthedocs.io/en/latest/faq.html