ZoneMinder

cnr0616 · Post by **cnr0616** » Tue Jul 19, 2005 9:08 pm

.....

Post by **cordel** » Tue Jul 19, 2005 9:12 pm

This sounds like fun. Let me now if you need anything special in the RPM to support it. I don't think you will but just in case the offer is there.
Regards,
Cordel

cnr0616 · Post by **cnr0616** » Tue Jul 19, 2005 9:40 pm

.....

Post by **zoneminder** » Thu Jul 21, 2005 11:48 am

This is an interesting variation. I'm sure we'd all like to hear how you get on!

Phil

cnr0616 · Post by **cnr0616** » Thu Jul 21, 2005 3:43 pm

.....

cnr0616 · Post by **cnr0616** » Fri Jul 22, 2005 3:20 am

.....

Post by **cordel** » Fri Jul 22, 2005 4:14 am

Awesome Craig, Looks really good. You could try an IP cam or if you wish you can stream from my ZM box a couple of cameras just to have something capturing just please be gentle on the fps as I only have 256kb up and this is the same bandwidth as the YUM, ftp, and web server. The user and pass are guest. http://cordel.no-ip.info:8080 Just let me know so I can shut down the remote that I have capturing now at 0.5 fps to reduce the load on my upload.
Phil this would be a nice item to show case some how. My only concern is how hot the xbox can get and I hope you got the new power cord to replace the one that catchs on fire

Cheers,
Cordel

cnr0616 · Post by **cnr0616** » Fri Jul 22, 2005 4:56 am

.....

cnr0616 · Post by **cnr0616** » Sun Jul 24, 2005 1:13 pm

.....

Ruler · Post by **Ruler** » Tue Jul 26, 2005 8:25 pm

Just an idea that may or may not work is to grab an external IDE->USB drive enclosure to slap your bigger drive into. I believe that it shows up as just another USB mass storage device, similar to a thumb drive, and mounted as /dev/sdan. It'd eliminate the $55 mod chip from the parts list, be more flexible, and only cost $15.

I've tried to get that driver working at home a few times for a USB camera, but never have gotten it to compile.

Ruler · Post by **Ruler** » Tue Jul 26, 2005 8:31 pm

Sweet project idea BTW.

Post by **cordel** » Wed Jul 27, 2005 5:05 am

Hi Craig,
Sorry I haven't forgotten about you, Work it running me 12+ hours a day now. I'll try putting that kernel together in the next couple days.
Regards,
Cordel

cnr0616 · Post by **cnr0616** » Thu Jul 28, 2005 6:06 pm

.....

tux · Post by **tux** » Thu Jul 28, 2005 8:32 pm

Hello

Your project is interesting.

I have a xbox with xebian and two usb ports in controler, I installed xebian without modchip (I used xploit-software), if works your project is posible I test it.

Spca5xx works with zm?, I have a trust spacecam 120 (9€ )when I test with zm I had problems

.

http://www.zoneminder.com/forums/viewto ... highlight=

I intented with spca5xx, tomorrow I will test with NW802 kernel module