Page 1 of 1
Picture?
Posted: Sun Mar 12, 2006 12:40 pm
by cupido
Hello,
i have installed FC4. The Camera work about network.
Don't become a picture in Zoneminder.
How install camera in Zoneminder. What i make in Source.
What i write in Remote-Host-Name an in Remote Host Path?
Can I help my?
Thank You for answer.
Cupido.
Posted: Sun Mar 12, 2006 6:06 pm
by jameswilson
what camera you using
axis2100 network
Posted: Sun Mar 12, 2006 6:41 pm
by cupido
Hello,
i forget it.
I use the axis2100 Network.
What must write by Remote Host Path and Name?
Thank you for the answer.
Cupido
Posted: Mon Mar 13, 2006 10:30 pm
by jameswilson
host
ip address only ie
10.0.0.2
path
/axis-cgi/jpg/image.cgi?resolution=320x240
Posted: Wed Mar 15, 2006 11:45 pm
by zoneminder
In 1.22.0 these values are also available by selecting one of the presets in the monitor config window.
Posted: Thu Mar 16, 2006 9:57 am
by Flash_
That's a neat feature, I missed that first time!
Would it be too spammy to add b&w options to the Axis presets?
I use
/axis-cgi/mjpg/video.cgi?resolution=640x480&color=0
640x480, colour grescale. ( color=0 )
I found that this uses considerably less cpu/memory/bandwidth than even 320x240 in 24bit colour, and with now 8 axis ip cams running here those kind of tweaks are kind of important.
Colour not that important imo for surveillance.
Small suggestion, no paddy if not implemented and no problem to add manually.
Posted: Thu Mar 16, 2006 10:02 am
by zoneminder
Adding this is no problem. To be honest I didn't even know they could do B&W!
Posted: Fri Mar 17, 2006 8:10 am
by Flash_
Yes - their web interface gives a wonderful section where you can "build" a url to the picture you want, with pulldowns for output size, jpeg quality, colour etc. Shows you the image and gives you a URL to use to fetch that in future. Other manufacturers could learn a lot!
I should stop before you start suspecting me of being an Axis plant.