Page 1 of 1
Question regarding AXIS Network Users
Posted: Thu Jul 27, 2006 8:35 pm
by dm
Where can you specify the USER and PASSWORD for cameras or is one forced to use anonymous access and restrict to # of connections?
In other words, can a username and password be specified in ZM Console for each AXIS Network Camera?
Thanks..
Posted: Thu Jul 27, 2006 10:30 pm
by jameswilson
pass
user:pass@<ip>
in the host part of the monitor, get it working first without auth then you know there is something wrong with the auth if it then stops
Posted: Thu Jul 27, 2006 10:49 pm
by dm
jameswilson wrote:pass
user:pass@<ip>
in the host part of the monitor, get it working first without auth then you know there is something wrong with the auth if it then stops
Thank you, looks like that worked.
Posted: Mon Jul 31, 2006 10:51 pm
by Mongo
user:pass@<ip>
in the host part of the monitor
Host Name user:pass@<ip>
Host Port 80
Host Path ?
What path do you use for an IP camera???
My camera monitors fine in a browser, but wont show up in ZoneMinder
Posted: Tue Aug 01, 2006 12:15 am
by jameswilson
depends on the camera
Posted: Tue Aug 01, 2006 3:45 am
by Mongo
I'm using an Axis 2100.
Posted: Tue Aug 01, 2006 9:00 am
by jameswilson
have a search for axis as there are various paths. Most people use 206's so id use one of those paths just to get you going
Posted: Wed Aug 02, 2006 1:52 am
by Mongo
I found the proper path and my camera (Axis 2100) is up and running.
Host Name user:pass@<ip>
Host Port 80
Host Path /axis-cgi/mjpg/video.cgi?resolution=640x480