IQeye700 Network Cameras
Posted: Thu Nov 16, 2006 10:10 am
Hi.
Soon ive got one of thes camra in reach for testing with zm, is it known to work?
Soon ive got one of thes camra in reach for testing with zm, is it known to work?
Page 1 of 1
Posted: Thu Nov 16, 2006 10:29 am
i tested one but failed but it is beleived to work yes
Posted: Thu Nov 16, 2006 1:50 pm
oh, how great, thanks for the reply!jameswilson wrote:i tested one but failed but it is beleived to work yes
Posted: Fri Dec 08, 2006 10:08 am
Hi finaly ive got the cam,
ive got it to work in the network, browsing the camera in the new with http://ip/now.jpg works prefect, i just cant get ZM to grab the pic.
my settings are
Monitor Iqeye
Id : 1
Name : IQEye
Type : Remote
Host : 192.168.1.200
Port : 80
Path : /now.jpg
Width : 512
Height : 384
Thats what i change, should i change someting more?
Zm is 1.22.2
ive got it to work in the network, browsing the camera in the new with http://ip/now.jpg works prefect, i just cant get ZM to grab the pic.
my settings are
Monitor Iqeye
Id : 1
Name : IQEye
Type : Remote
Host : 192.168.1.200
Port : 80
Path : /now.jpg
Width : 512
Height : 384
Thats what i change, should i change someting more?
Zm is 1.22.2
Posted: Sat Dec 09, 2006 3:02 pm
id try 1.22.3 as this is better with ip cameras
Posted: Fri Dec 15, 2006 9:40 am
okay, ill try that today... got some time now.. 
Posted: Fri Dec 15, 2006 11:07 am
like a GLOVE!
works prefect so fare, just testing now, low pic size 256*192 i had to upgrade then it workt.
ill try to capture the lagerst image now.. 2048*1536
Have i nice day, i will!
works prefect so fare, just testing now, low pic size 256*192 i had to upgrade then it workt.
ill try to capture the lagerst image now.. 2048*1536
Have i nice day, i will!
Posted: Sat Dec 16, 2006 11:12 pm
you will probably run into a shared mem linit on the higher res's if so check you logs to confirm
Posted: Mon Dec 18, 2006 9:16 am
yeah the machine died with a higer res, its only a 1Ghz can, so im planinge to get a new one, what should i think about when i construct the new can?
Posted: Fri Feb 02, 2007 7:32 am
it works like a charm now..
Calibrating delay using timer specific routine.. 4810.35 BogoMIPS (lpj=9620710)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
using 3 segate Model: ST3250624AS in a software raid.
mobo is Asus M2NPV-vm bord with 2gb ram on.
and gfx is MSI NX7300GS
Dist is http://cdimage.debian.org/cdimage/etch_ ... etinst.iso
just installed zm bye the installations instuctions , had wrong password but after fixing that it works lika hell..
now i want to use the zm to just take stills at alarm, and show it on a LCD like 50" or so..
Calibrating delay using timer specific routine.. 4810.35 BogoMIPS (lpj=9620710)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
using 3 segate Model: ST3250624AS in a software raid.
mobo is Asus M2NPV-vm bord with 2gb ram on.
and gfx is MSI NX7300GS
Dist is http://cdimage.debian.org/cdimage/etch_ ... etinst.iso
just installed zm bye the installations instuctions , had wrong password but after fixing that it works lika hell..
now i want to use the zm to just take stills at alarm, and show it on a LCD like 50" or so..